Motorola i2000plus manual Receiving a Group Call, Adding and Storing a Talkgroup

Making Group Calls (iDEN Only)

MAKING GROUP CALLS (iDEN ONLY)

A Group Call allows you to communicate instantly with members of a selected Talkgroup–a pre-defined set of people who share a communication need.

Talkgroups appear on your display as numbers or programmed names, such as Talkgrp10 or Sales Team.

To make a Group Call:

1.Press m until “Group Ready” displays. Your most recently used talkgroup displays, for example, “Talkgrp 10”.

2.To place a call, do one of the following:

Group Ready Talkgrp 10

•To speak to this talkgroup, press and hold the PTT button. Wait for the chirp, then speak into the microphone.

Alert Mail

•To speak to another talkgroup, press s until you see the desired talkgroup name. Press and hold the PTT button.Wait for the chirp, then speak into the microphone.

3.To listen, release the PTT button.

Receiving a Group Call

When you receive an incoming Group call, you will hear a brief chirp- like tone. Your i2000plus phone automatically switches to Group mode, and the Talkgroup name displays.

1.Your phone must be idle, that is, not busy in an active call.

2.Wait for the caller to finish speaking, then press and hold the PTT button. Begin speaking after you hear the chirp.

3.To listen, release the PTT button.

You can receive group calls only in the Talkgroups that you have predefined. For more information, see “Adding or Storing a Talkgroup” on Page 59.

Adding and Storing a Talkgroup

To add and store a talkgroup name to your i2000plus phone:

1.Press n until you see the “Prgm” menu selection.

2.Select “Prgm”.

3.Press 2, 3.

4.Select “Ok”.

59