Motorola 9C manual Using Bluetooth, Using a cable

using Bluetooth

To use Bluetooth to link to a network:

Note: You must have a computer that has Bluetooth capabilities for modem link.

1On your phone, make sure Bluetooth is turned on.

2On your computer, launch the Bluetooth devices applet from the task bar.

Note: Not all computers have the same procedure to locate the Bluetooth window and set up dial-up networking.

3On your computer, in the Bluetooth window menu bar, select the “Connections” menu, “Dial-up Networking” and then “Find devices.”

4The computer finds your phone and displays the dial up networking window.

using a cable

To use a USB cable with your phone to connect with modem link to a network, first install networking drivers onto your computer:

1Place the provided Companion CD into the CD Drive on your computer. The Companion CD Installation wizard window automatically displays.

2On your computer, click “Applications” and then “Dial-Up Networking Software.”

3Follow the prompts as directed to install the drivers onto your computer.

Next, enable modem link on your phone and install phone drivers:

1On your phone, press the left soft key (-) (Start).

2Use the thumb wheel to scroll to Accessories and press the thumb wheel or center select key (s)

to select it.

connections 85