Harman-Kardon CDR 26 owner manual Pressing the Play Button

Page 6

FRONT-PANEL CONTROLS

$Record-Deck Open: Press this button to open the Record Deck %.

%Record Deck: This disc deck is used to record or play back CD, CD-R and CD-RW discs.

^Optical Digital Input: This optical digital input may be used to connect a portable digital audio player to the CDR 26 for digital recording. Remove the dust cap before connecting a cable to this jack. Keep the dust cap in a safe place and replace it when the cable is disconnected in order to prevent the possibility of dust getting into the jack and damaging it.

&Coaxial Digital Input: This coaxial digital input may be used to connect a portable digital audio player to the CDR 26 for digital recording.

*Analog-Record Level Control: The control is used to adjust the input level when making recordings from analog sources such as cassettes, or when CDs are recorded in an analog mode. See page 21 for more information on record levels.

(Record-Deck Stop: Press this button to stop the CD in the Record Deck.

ÓRecord-Deck Play/Select: This button has two functions. It may be pressed when a standard CD is in the Record Deck to put the machine in play, or it may be used to enter a selection or start certain record functions.

ÔRecord-Deck Pause: When the Record Deck is in the Play mode, pressing this button will pause the disc. If the disc has previously been paused, pressing this button will restart the playback.

Record-Deck Program Button: Press this but- ton to begin the programming sequence for the Record Deck. See page 18 for more information on programming playlists on the CDR 26.

ÒRecord-Deck Next: When a disc is playing in the Record Deck %, press and hold this button to play the disc in a fast-forward mode to quickly locate a desired passage. At any time, tapping the button and quickly releasing it will move to the next track on a disc in play.

ÚRecord Deck Previous: This button has two functions. When a disc is playing in the Record Deck %, press and hold this button to play the disc in a fast reverse mode to quickly locate a desired passage. At any time, tapping the button and quickly releasing it will move to the beginning of the current track, and the next press will move to the previous track. When a

disc is stopped, each press will move back one for programming or play when the disc is stopped. Once a track is entered, it may be played by simply pressing the Play Button Ój.

ÛInput Select: Press this button to select the input source (analog or digital) for recording. See page 20 for more information on input selection.

ÙRecord-Deck Time Display Select: Press this button to cycle through the time display options for the Record Deck. See page 17 for more information on the time display.

ıInformation Display: The indicators in the Information Display provide status reports on the oper- ation of the CDR 26. See page 7 for complete expla- nations of each indicator.

ˆRemote Sensor: The IR sensor that receives the commands from the remote control is behind this area. Do not cover or obscure this part of the front panel, to avoid any malfunction with the remote.

˜Play-Deck Time Display Select: Press this but- ton to cycle through the time display options for the Play Deck. See page 17 for more information on the time display.

¯Continuous Play Button: Press this button to place the CDR 26 in Continuous Play mode, which causes it to alternate play between the discs in each deck continuously, so long as the next deck to be played contains a disc and play has not been stopped. To return to the default Single Play mode, in which play stops after the disc in the selected deck has played once, press this button again.

˘Play-Deck Next: When a disc is playing in the Play Deck 3, press and hold this button to play the disc in a fast-forward mode to quickly locate a desired passage. At any time, tapping the button and quickly releasing it will move to the next track on a disc

in play.

¸Play-Deck Previous: This button has two func- tions. When a disc is playing in the Play Deck 3, press and hold this button to play the disc in a fast- reverse mode to quickly locate a desired passage. At any time, tapping the button and quickly releasing it will move to the beginning of the current track, and the next press will move to the previous track. When a disc is stopped, each press will move back one track for programming or play when the disc is stopped. Once a track is entered, it may be played by simply

pressing the Play Button

j.

˝Play-Deck Program Button: Press this button to begin the programming sequence for the Play Deck. See page 18 for more information on programming playlists on the CDR 26.

Play-Deck Pause: When the Play Deck is run- ning, pressing this button will pause the disc. If the disc has previously been paused, pressing this button will restart the playback.

Play-Deck Play: Press this button to begin play- back of a CD in the Play Deck or the dubbing process.

Play-Deck Stop: Press this button to stop the CD in the Play Deck.

6 FRONT-PANEL CONTROLS

Page 5 Page 7
Image 6
Page 5 Page 7
Contents CDR DUAL-TRAY CD-R/CD-RW RECORDER/PLAYERTable of Contents CDR 26 DUAL-TRAY CD-R/CD-RW RECORDER/PLAYERIntroduction Important Information About CD RecordingThank you for choosing Harman Kardon Safety Information Important Safety InformationUnpacking FRONT-PANEL Controls Play Pressing the Play ButtonSync Indicator Sample-Rate Conversion Indicator Analog Indicator Track Dubbing IndicatorFront-Panel Input Indicator Dubbing Indicator FRONT-PANEL Information DisplayTrack Time Indicators These indicators light § Optical-Digital Output AC Power Cord REAR-PANEL ConnectionsRemote Control Functions Power OnPlay Deck CDP Open Press this button to open the Play Deck Record Button Press this button to begin a manual recordingStop Press this button to stop playback or recording Installation and Connections Placement of the CDRConnections to Your Audio System Power Connections BatteriesIR Remote Connections CD-R Terminology and Display Messages CD Recording BasicsDisc Types Your CDRLoading and Unloading Discs Using the RemotePlayback Basics To turn the unit completely offRandom Play To resume playback at the point where the disc was pausedNormal Play SearchContinuous Play Time DisplayHeadphone Listening Program Play Programming PlaylistsRepeat Play Recordings on the CDR 26 may be made in a num- ber of ways CD RecordingDisc Dubbing Recordings may be made from an external analog sourceCD Sync Recording Recording From an External SourceErasing an Entire CD-RW Disc Finalizing CD-R and CD-RW DiscsUnfinalizing a CD-RW Disc Erasing a Single TrackCD Recording Troubleshooting Guide and Error Messages CDR 26 Technical Specifications Signal Format Playback Sampling Frequency 44.1kHz ConversionSpecial Notice Read first! Important Safety Precautions
Related manuals
Manual 4 pages 49.73 Kb Manual 24 pages 11.09 Kb

CDR 26 specifications

The Harman-Kardon CDR 26 is a sophisticated CD recorder that combines high-quality audio playback with recording capabilities, catering to audiophiles and casual listeners alike. Renowned for its sleek design and user-friendly interface, the CDR 26 has become a popular choice for those looking to preserve their favorite music from CDs or other sources onto writable CDs.

One of the standout features of the CDR 26 is its dual disc operation, allowing users to seamlessly switch between a CD playback source and a recording medium. This feature enhances the recording process, making it efficient and straightforward. The device supports various disc formats, including CD-R and CD-RW, giving users the flexibility to burn their music onto a variety of media.

The CDR 26 employs advanced recording technologies that ensure optimal audio fidelity. With a high-quality 24-bit/96kHz digital-to-analog converter, it provides rich sound reproduction that faithfully captures the nuances of the original recordings. Additionally, the device boasts a variety of recording modes, including on-the-fly recording, which allows users to create compilations without the need for a computer.

Another remarkable characteristic of the CDR 26 is its integrated digital signal processing (DSP) features. The built-in DSP allows for various editing functions, such as track splitting and adjusting levels, making it easier for users to create professional-quality recordings. The intuitive interface includes an LCD screen that displays pertinent information, including track numbers, remaining recording time, and more, making navigation clear and efficient.

Furthermore, the Harman-Kardon CDR 26 includes extensive connectivity options. With optical and coaxial digital inputs, as well as traditional analog inputs, users can connect it to a variety of audio sources, including turntables and tape decks. This versatility makes it an ideal component in a comprehensive audio system.

In summary, the Harman-Kardon CDR 26 is a feature-rich CD recorder that excels in both audio quality and usability. Its dual disc operation, advanced recording technologies, integrated DSP capabilities, and versatile connectivity options make it a valuable tool for anyone who wishes to curate and preserve their musical collections while enjoying high-fidelity sound. Whether for personal use or as part of a larger audio setup, the CDR 26 represents a reliable choice for all your CD recording needs.
Top Page Image Contents