Sharp DT-200 operation manual Important Safeguards

Page 5

IMPORTANT SAFEGUARDS

Caution Concerning the Lamp Unit

There is a potential hazard of glass particles if the lamp ruptures. In case of lamp rupture, contact your nearest Sharp Authorized Service Center or Dealer for a replacement.

See “Replacing the Lamp” on page 45.

CAUTION

PRECAUCIÓN

PRÉCAUTION

BQC-XVZ90+++1

This caution is found at the bottom of the projector. See “Caution Concerning the Lamp Replacement” on page 2 for its location.

LAMP REPLACEMENT

PRECAUTIONS A OBSERVER LORS

CAUTION

DU REMPLACEMENT DE LA LAMPE.

BEFORE REMOVING THE SCREW, DISCONNECT POWER CORD.

DEBRANCHER LE CORDON D’ALIMENTATION AVANT DE RETIRER LES VIS.

HOT SURFACE INSIDE. ALLOW 1 HOUR TO COOL BEFORE

L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE

REPLACING THE LAMP. REPLACE WITH SAME SHARP LAMP

1 HEURE AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE.

UNIT TYPE BQC-XVZ90+++1 ONLY. UV RADIATION : CAN CAUSE

NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-XVZ90+++1.

EYE DAMAGE. TURN OFF LAMP BEFORE SERVICING.

RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES YEUX.

MEDIUM PRESSURE LAMP : RISK OF EXPLOSION.

ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN.

POTENTIAL HAZARD OF GLASS PARTICLES IF LAMP HAS

LAMPE A MOYENNE PRESSION : RISQUE D’EXPLOSION.

RUPTURED. HANDLE WITH CARE. SEE OPERATION MANUAL.

DANGER POTENTIEL DE PARTICULES DE VERRE EN CAS D’ECLATEMENT DE LA LAMPE.

 

A MANIPULER AVEC PRECAUTION, SE REPORTER AU MODE D’EMPLOI.

 

 

Information

Important

 

 

95˚F

(+35˚C)

41˚F

DT-200

(+5˚C)

 

DT-200

Cautions Concerning the Setup of the Projector

For minimal servicing and to maintain high image quality, SHARP recommends that this projector be installed in an area free from humidity, dust and cigarette smoke. When the projector is subjected to these environments, the lens and part of filter must be cleaned more often than usual. As long as the projector is properly maintained in this manner, use in these environments will not reduce the overall operation life. Please note that all internal cleaning must be performed by a Sharp Authorized Service Center or Dealer.

•Do not expose the projector to extreme heat or cold. Operating temperature: 41°F to 95°F (+5°C to 35°C) Storage temperature: –4°F to 140°F (–20°C to +60°C)

Notes on Operation

•The exhaust ventilative hole, the lamp cage cover and adjacent areas may get extremely hot during projector operation. To prevent injury, do not touch these areas until they have sufficiently cooled down.

•Allow at least 1 foot (30 cm) of space between the exhaust ventilative hole and the nearest wall or obstruction.

•If the cooling fan becomes obstructed, a protection device will automatically turn off the projector lamp. This does not indicate a malfunction. Remove the projector power cord from the wall outlet and wait at least 10 minutes. Then turn on the power by plugging the power cord back in. This will return the projector to the normal operating condition.

WARNING: High brightness light source. Do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly into the beam of light.

E-4

DT-200(E)#p01_07.p65

4

02.11.21, 11:27 AM

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Sharp Corporation English Declaration of Conformity InformationAccessories CleaningPower Sources Power-Cord ProtectionImportant Safeguards Lamp Monitor Function Temperature Monitor FunctionContents DMD* Digital Micromirror Device Chip Outstanding FeaturesProjector Part NamesAttaching the Lens Cap Part NamesBattery Remote ControlBattery cover Cover Compartment Inserting the batteriesSupplied Accessories Connecting to Video Equipment Power SupplyConnecting the Power Cord ConnectionsProjector Connecting to a DVD Player and DTV DecoderConnecting to a DTV decoder with DVI output Connecting to a ComputerConnecting to a DTV decoder with analog RGB output ProjectorRemote Control Operating the Remote ControlZooming and Focusing Power ON/OFFPress Power on Press Power OFFUsing the Swivel Stand Setting Up the ScreenRemoving the Swivel Stand Attaching the Swivel StandConnections Using the Lens ShiftProjector Projected Image Description of 2D Keystone Correction Keystone CorrectionHorizontal Keystone Correction Vertical Keystone Correction DescriptionScreen area When using a wide screen Adjusting the Projection DistanceWhen using a normal screen Upper and Lower Lens Shift Position Ceiling Mount Upper and Lower Lens Shift PositionImage Projection Projection Using a MirrorRear Projection Ceiling-mount ProjectionSelecting the Input Signal Source Using the Operation ButtonsAdjusting the Picture Aspect Ratio On-screen DisplayFreeze Function Input SignalButtonsOperation Image TypeBasic Operation Using the Menu ScreenBasic Operations Menu Bars Items on the Input 1 or 2 Mode Menu BarMain menu Sub menu OperationBasicPAL-M PAL-N Items on the Input 3 or 4 Mode Menu BarOn-screen Display Video input in Input 3 or 4 mode Adjusting the PictureDescription of Adjustment Items Description of Color Temperature Adjusting the Color TemperatureEmphasizing the Contrast Description of White EmphasisDescription of Gamma Modes Gamma Correction FunctionStoring the Adjustment Values for each Memory Number Picture Setting FunctionDescription of Picture Setting MemoryClock Adjusts vertical noise Phase Adjusting the Computer and DVD/DTV ImagesPreset settings PosChecking the Input Signal Special Modes AdjustmentOFF Auto Sync AdjustmentAuto Sync Adjustment Using the Remote Control Turning On/Off the On-screen Display Selecting the Signal TypeDescription of OSD Display BasicDescription of Background Images Setting the Video Signal Video menu onlySelecting a Background Image Digital Shift Setting Adjustments for the Screen Position and SizeDescription of Digital Shift Button Image moves down Image moves upDescription of Subtitle Setting Subtitle SettingSelecting the Menu Color Selecting the Menu Screen PositionDescription of Menu Position Description of Menu colorSelected Description Automatic Power Shut-off FunctionDescription of Automatic Power Shut-off Description of Projected Images Reversing/Inverting Projected ImagesSelecting the On-screen Display Language Maintenance Indicators Lamp/Maintenance IndicatorsCondition Problem Possible Solution Troubleshooting MaintenanceConfirming the Lamp Usage Time Lamp MaintenanceImportant Note to U.S. Customers Replacing the LampUser service screws Removing and installing the lamp unitLamp 0000H is displayed on the screen Attachcover. the lamp unitHow to clean the ventilative holes Cleaning the Ventilative HolesTroubleshooting Using the Kensington LockService Information For the U.S Problem CheckDVI Analog RGB Input DVI Analog Component Input Connecting Pin AssignmentsDVI Digital Input Computer Compatibility Chart Units inches mm DimensionsPAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC SpecificationsGlossary Hdcp IndexValid in USA only Where to Obtain Service What to do to Obtain ServiceLimited Warranty Memo

DT-200 specifications

The Sharp DT-200 is an innovative device that has garnered attention for its impressive features and cutting-edge technology. Designed for versatility and user-friendly operation, this model excels in multiple applications, appealing to both home users and professionals alike.

One of the standout features of the DT-200 is its high-resolution display, offering vibrant colors and sharp images. With a screen size that balances usability and portability, users can enjoy an optimal viewing experience whether they're working on intricate designs, editing photos, or enjoying multimedia content. The display is engineered to be energy-efficient, which helps prolong battery life during prolonged usage.

The DT-200 boasts advanced connectivity options, including Wi-Fi and Bluetooth capabilities. These features facilitate seamless integration with a variety of devices, allowing users to share data and access the internet effortlessly. The incorporation of cloud technology enables users to store and retrieve important files from anywhere, enhancing productivity and flexibility.

Performance-wise, the DT-200 is powered by a robust processor that ensures smooth operation and rapid task execution. It is equipped with ample RAM and storage, providing the necessary resources for multitasking and accommodating large files. This combination of hardware and software makes it suitable for demanding applications, such as graphic design and video editing.

In terms of build quality, the Sharp DT-200 is designed with durability in mind. Its sleek, lightweight construction ensures portability without sacrificing sturdiness. The device is also resistant to everyday wear and tear, making it an ideal choice for both office environments and on-the-go professionals.

Another significant characteristic of the DT-200 is its intuitive user interface. The operating system is designed to be user-friendly, allowing users of all skill levels to navigate effortlessly through menus and applications. Coupled with responsive touch controls, the device maximizes ease of use, ensuring that tasks can be completed efficiently.

Moreover, the DT-200 is equipped with a variety of multimedia features, including built-in speakers and a high-quality microphone. These enhancements facilitate video conferencing and media playback, making it an excellent choice for remote work and online collaboration.

In conclusion, the Sharp DT-200 is a versatile device that stands out due to its high-resolution display, advanced connectivity, robust performance, and durable design. With intuitive features and user-friendly controls, it caters to the needs of various users, making it a valuable addition to any tech collection.
Top Page Image Contents