Motorola V300 manual Using Caller ID, Incoming Calls, Activate automatic redial

Calling Features

With automatic redial, your phone automatically redials the number. When the call goes through, your phone rings or vibrates 1 time, displays Redial Successful, and then connects the call.

You must turn on automatic redial to use the feature. To turn automatic redial on or off:

Find the Feature M > Settings > Initial Setup > Auto Redial

When automatic redial is turned off, you can manually activate the feature to redial a phone number. When you hear a busy signal and see Call Failed, Number Busy:

Press	To
Nor RETRY (+)	activate automatic redial

Using Caller ID

Incoming Calls

Calling line identification (caller ID) displays the phone number for incoming calls in your phone’s external and internal displays.

The phone displays the caller’s name (and picture, if available) when the name is stored in your phonebook, or Incoming Call when caller ID information is not available.

You can also set your phone to play a distinctive ringer ID for specific entries stored in your phonebook. For more information, see page 73.

58