1.Removable Dust Cover
2.Platter 7 ¾”
3.45 rpm Adapter
4.Adjustable Tone Arm Balance
5.Tone Arm Lift Lever
6.3 Speed (33 1/3, 45, 78 rpm) Selection
7.Auto Stop Control
8.Tone Arm Balance Rest
9.USB Jack (connect to PC or Mac)
10.RCA Output (connect to stereo / audio system)
11.AC Power Cord (connect to wall power outlet)
12.Turntable Feet
13.Magnetic (Needle) Cartridge
14.
LISTENING to a RECORD
1.Lift and remove the dust cover (1)
2.Connect the AC power cord (11) to an electrical outlet (120V~60Hz)
3.Use RCA cables to connect the RCA output (10) to your powered speaker or stereo system. Make sure the red RCA and white RCA are inserted in the red & white jacks accordingly.
4.Place a record on the turntable and select the player speed (33/45/78) (6) according to the desired record speed. NOTE: when playing a 45 rpm record, use the 45 rpm adapter (3)
5.Remove the protective cover from the needle on your cartridge (13)
6.Remove the tone arm from the rest (8), push Lift Lever backward (5) to raise the tone arm and gently move the tone arm to the desired position over the record. The turntable will begin to spin when the arm is moved toward the record. Push the Lift Lever ○5 forward lower the tone arm slowly onto the desired position on the record to begin playing the record. Adjust the tone arm balance if the cartridge (needle skates (slides) on your album
7.If Auto Stop Control (7) is turned ON, record will stop automatically when finished.
If Auto Stop Control (7) is turned OFF, record will NOT stop automatically when finished.
8.For best performance and product maintenance, unplug the turntable when not in use.
PART II: Record from Turntable to PC or Mac
Audacity
4