Motorola V8 manual Talking phone, Handsfree speaker, Codes & passwords

Tip: Press and release the voice command key on the side of your phone to see the list of voice commands.

talking phone

Set your phone to recite incoming caller ID information, read the names of menu features or contact list entries, read messages you receive, and provide audio feedback for phone functions.

Find it: s> uSettings > Phone Settings > Talking Phone

Shortcut: Press and hold the external voice command key on the side of your phone. When the phone prompts you to say a command, say “Talking Phone.”

handsfree speaker

During a call, press Options > Speaker On to turn on the handsfree speaker. Your display shows the speakerphone indicator until you turn it off (press Options > Speaker Off) or end the call.

Note: The use of wireless phones while driving may cause distraction. Discontinue a call if you can’t concentrate on driving. In addition, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.

codes & passwords

Your phone’s four-digit unlock code is originally set to 1234. The six-digit security code is originally set to 000000. If your service provider didn’t change these codes, you should change them:

Find it: s> uSettings > Security > Change Passwords

You can also change your SIM PIN codes or call barring password.

If you forget your unlock code: At the

Please verify the Unlock Code prompt, try entering 1234 or the last four digits of your phone number. If that doesn’t

30basics