Motorola W260g manual Check battery meter, Tty operation, Set TTY mode, Voice

check battery meter

Find it: s> w Settings > Phone Status > Battery Meter

tty operation

You can use an optional TTY device with your phone to send and receive calls. You must plug the TTY device into the phone’s headset jack (see page 2) and set the phone to operate in one of three TTY modes.

Note: Use a TSB-121 compliant cable (provided by the TTY device manufacturer) to connect the TTY device to the phone.

Note: Set the phone volume to level 4 (middle setting) for proper operation. If you experience a high number of incorrect characters, adjust the volume as needed to minimize errors.

Note: For optimal performance, your phone should be at least 12 inches (30 centimeters) from the TTY

device. Placing the phone too close to the device may cause high error rates.

set TTY mode

When you set your phone to a TTY mode, it operates in that mode whenever the TTY device is connected:

Find it: s> w Settings > Initial Setup > TTY Setup

Scroll to one of the following options and press SELECT:

TTY option

Voice	Set to standard voice mode.
TTY	Transmit and receive TTY
	characters.
VCO	Receive TTY characters but
	transmit by speaking into the
	microphone.

basics 25