7 Getting Connected
7.1 Mobile Networks
Your mobile phone will be automatically configured to use your network operator’s 2G/3G service (if available) when you turn on the phone for the first time. Note that the SIM/UIM card mustbeinserted (some CDMA mobilephoneshave anintegratedUIM card and do not need a separate UIM card)
7.1.1 Checking the Network Connection
1.Touch > Settings.
2.Touch Wireless & networks > Mobile networks > Network Settings.
3.Touch Network operators or Access Point Names to check the network connection.
Your mobile phone will automatically read the access point settings from the SIM/UIM card (if any). For this reason, do not change the access point parameters; otherwise, you might not be able to access network resources.
7.1.2 Turning on the Data Service
1.Touch > Settings.
2.Touch Wireless & networks > Mobile networks.
3.Select the Data enabled check box to turn on the data connection.
7.2 Wi-Fi
7.2.1 Turning On Wi-Fi
1.Touch > Settings.
2.Touch Wireless&networks, and then select the
33