Philips M888 user manual Frequently asked questions

Page 9

Frequently asked questions

No signal bar is displayed on the screen.

The handset is out of range. Move it closer to the base station.

If the handset displays

[Register your Handset], register your handset. (See the section on “Register additional handsets”).

If I fail to pair (register) the additional handsets to the base station, what do I do?

Your base memory is full. Press

.Then press /

to select

> [Unregister] to unregister the

unused handsets and try again.

 

I have chosen a wrong language which I cannot read, what do I do?

1Press to go back to the standby screen.

2Press to access the main menu screen.

3 Press /

to select , then you see one of

 

the following texts appear on the screen:

 

[Language]

 

[Langue]

 

[Sprache]

 

[Lingua]

4 Select it to access the language options.

5 Select your own language.

My handset is in searching status, what do I do?

Make sure that the base station has power supply.

Register the handset to the base station.

Move the handset closer to the base station.

I cannot change the settings of my voice mail, what do I do?

The voice mail service is managed by your service provider but not the phone itself. Contact your service provider to change the settings.

No display

Make sure the batteries are charged.

Make sure there are power and phone connections.

The handset on the charger does not charge.

Make sure the batteries are inserted correctly.

Make sure the handset is placed properly on the charger.The LED at the back of the handset flashes once.

Make sure the docking tone setting is turned on. When the handset is placed correctly on the charger, you can hear a docking tone.

The charging contacts are dirty. Disconnect the power supply first and clean the contacts with a damp cloth.

Batteries are defective. Purchase new ones with the same specifications.

Bad audio (crackles, echo, etc.)

The handset is nearly out of range. Move it closer to the base station.

The phone receives interference from the nearby electrical appliances. Move the base station away from them.

The phone is at a location with thick walls. Move the base away from them.

The handset does not ring.

Make sure the handset ringtone is turned on.

The caller ID does not display.

The service is not activated. Check with your service provider.

The caller’s information is withheld or unavailable.

Image 9
Contents M888 When using the phone as a baby monitor Important safety instructionsOverview Connect Get started Configure your phoneEnjoy Learn more Technical data BatteryAdapter Frequently asked questions Page 0168
Related manuals
Manual 52 pages 55.66 Kb