Iluv IMM153 instruction manual Operational Instructions

GETTING STARTED

Power

On

Connect AC power adapter to the unit. Then plug into AC wall outlet. Clock will appear on LCD. Press POWER/MODE/AL OFF to turn on the unit. Power indication LED will light and LCD will display current playing mode.

OFF

Press and hold POWER/MODE/AL OFF for three (3) seconds to turn off the unit. LCD will display current time only.

Back Up battery

Insert two (2) AAA batteries. When there’s a power outage, clock will still be displayed. In this status, the unit will not fully function. When the inserted battery is low, low battery indicator will display on the LCD.

Back Up Function

If the AC supply is interrupted, the clock display and preset radio stations will go off and all settings will be canceled. To back up the clock and preset stations, insert two “AAA” size batteries (not supplied) in the battery compartment in the base of the unit. The back up battery does not provide operation of your iPod.

Note: Always use Alkaline batteries and remove the batteries when the unit is not to be used for an extended period of time.

OPERATIONAL INSTRUCTIONS

Setting the Clock

1.In standby mode, press and hold TIME SET on the top panel for 3sec. to enter Clock set mode.

2.The hour digit will begin flashing. Press or to set the hour. Press TIME SET to confirm.

3.When hour is confirmed, minute digit will begin flashing. Press or to set the minute. Press TIME SET to confirm.

Setting the Alarm

User is able to set two distinct alarms on the unit.

Press or to enable Alarm 1 or Alarm 2. When Alarm 1 or Alarm 2 or both Alarm 1 and Alarm 2 is enabled, icon will be displayed on the LCD. To disable, Press or again. Icon will disappear

1.Press and hold the button for three(3) sec. and the hour digit will begin flashing. Press or to set the hour. Pressto confirm.

2.Minute digit will begin flashing, Press or to set the minute. Pressto confirm.

3.Wake up mode display will begin flashing, Press or to select from below:

·Wake to FM radio. Pre–tune your desired radio channel in FM radio mode before setting the wake up function.

·Wake to your iPod.

·Wake to Buzzer.

·Wake to Shaker. Make sure the Shaker is plugged in into “SHAKER” behind the unit.

Notes: Shaker can be combined with other wake to modes.

When FM radio, iPod, or Buzzer is selected, the iMM153 will ask whether or not to enable shaker. When asked, press or to choose “On” or “Off” then pressto confirm.

*“On” or “OFF” on LCD screen refers to the shaker funtion, not the alarm itself.

4.When the wake up mode is selected, the Alarm indicator appears on the display.

Notes: For Radio wake up and iPod playback,

user must set desired volume for alarm.

The iMM153 will remember last volume setting to play music for alarm. If the wake up mode is set to iPod playback with no iPod connected, it will become the buzzer alarm.

If the wake up mode is set to Shaker but the Shaker is not connected, it will become the buzzer alarm

· To set Alarm 2, press and hold thebutton and repeat steps 1 to 4 above.