Lenmar Enterprises BC3GS owner manual Battery Consumption, Charging Your iBatteryCase, LED Light

Page 1

Model BC3GS

Battery Consumption

With the “ON / OFF” switch in the “ON” position your iPhone will always drain the case ￿rst until its power is 5%, then your iPhone switches to its main battery. With the “ON / OFF” switch in the “OFF” position your iBatteryCase is in standby mode ready to charge your iPhone by switching it to the “ON” position.

iBatteryCase - iPhone 3G & 3Gs Battery Case

PLEASE READ THIS INFORMATION THOROUGHLY BEFORE USING THIS PRODUCT. IT CONTAINS IMPORTANT OPERATING INSTRUCTIONS FOR YOUR POWERPORT UNIT.

Owner’s Manual

Thank you for purchasing the iBatteryCase - iPhone 3G & 3Gs Battery Case. The iBatteryCase case o￿ers the convenience of an external battery built into the full protection of a hard case. You can use it as a case all the time never having to remove it and enjoy the convenience of extra battery power when you need it.

Included in the package you have purchased: iBatteryCase, USB charging / Sync cable and User Manual

Charging Your iBatteryCase

Note: Prior to initial use fully charge your iBatteryCase before connecting to your iPhone.

You can charge the iBatteryCase case with the Micro USB to USB cable included with the case. Just plug the Micro USB into the case, and the other ends USB into a computer USB port or into a wall plug style adapter that has a USB out. Switch the iBatteryCase to “OFF” and the case will begin to charge.

Checking remaining capacity of the case

The integrated LED status indicator tells you exactly how much battery power is left in your case. Simply press the test button The 1st LED will indicate 30% or less charge remaining, the 2nd LED will indicate between 30 – 70% charge remaining and the 3rd LED will indicate 70 -100% of charge remaining.

SYNC

Enjoy the convenience of syncing your iPhone without ever removing the case. Using the supplied cable you can charge and sync your iPhone to iTunes without ever removing it. Just plug the supplied Micro USB cable in to the case and the other end into your computers USB slot.

LED Light

The LED light is activated by pressing and holding down the button next to the LED status indicators until it lights. To turn it o￿ press and hold the button again until it turns o￿.

Operating the camera

LED Light

LED Status

Indicator

Button

USB

LED Status

Indicator

Button

The LED status indicators show the charging status of the case. The ￿rst LED will blink as it’s charging then become steady, and then the second will blink and also become steady. Finally the third will blink and once the case is fully charged it will also become steady. Then the charging progress is done.

The camera function on your iPhone works with no obstructions while the case is on, in fact the LED Light will add to the light on your indoor pictures. Just hold the button next to your LED status indicators until it lights, when your ￿nished taking pictures just hold the button again until the LED Light shuts o￿.

Diagram:

1

2

 

 

LED Light

 

 

 

USB

Specifications

Cell type:

Lithium-Polymer Battery

Input:

DC 5V500mA

Output:

DC 5V500mA

Capacity:

1300mAh

Standby:

Up to 240 hours*

Talk Time:

Up to 4hours*

Internet Use:

Up to 4.5 hours and on Wi-Fi up to 5 hours*

Audio Play:

Up to 17 hours*

 

LED

 

Status

On/Off Switch

Indicator

Button

Dimensions:

L126xW66xT20mm

Weight:

55g

Compatibility:

iPhone 3G/3Gs

Video Play: Up to 5 hours*

*All above times can vary due to device settings, location, and signal strength.

With the built in ON / OFF switch you have the option of using the iBatteryCase when you need it. When you need an extra charge in your phone just switch it to the “ON” position and the iPhone case will proceed to charge your main battery. If you are not quite ready to charge you phone just leave the switch in the”OFF” position.

Installing your iPhone into the iBatteryCase

Micro USB port

On/Off Switch

Limited 1 Year Warranty

This limited warranty starts from the date of original purchase and expires one year thereafter. If, during this period, any part, because of manufacturing defects or workmanship, fails to function properly under normal use it will be repaired at no charge for parts and labor or, at our option, the product will be replaced. The following is excluded: damages from delay or loss of use of equipment or damaged batteries, malfunctions resulting from misuse, tampering, unauthorized repairs, modi￿cations or accident.

Package the unit and its accessories carefully using ample padding material to prevent damage in transit and ship it prepaid and insured to:

LENMAR ENTERPRISES, INC.

4035 Via Pescador

Slide your iPhone facing you into the iBatteryCase from the top making sure the 30 pin connector and the bottom of the iPhone line up and connect correctly. Then take the top cover aligning it into the channels of the lower case, slide down until it sets ￿rmly into the bottom half of the case. (Pay attention to the openings for the headphone jack and the power jack, making sure they line up.) Once connected you can turn the switch located on the bottom of the case to the “ON” position. You should now see the charge indicator icon appear on your iPhone.

Cover

Top Cover

 

Apple 30 Pin Connector

Camarillo, CA 93012 USA

When sending in product for service, your package should include evidence of date and place of purchase. Enclose $10.00 for shipping and handling for addresses in the U.S. and $15.00 in Canada. For outside the U.S. and Canada, freight will vary depending upon ship-to address.

Proposition 65 Notice (California)

The following statement is required in the state of California pursuant to the settlement of an action brought by the Mateel Environmental Justice Foundation against multiple electronics and appliance manufacturers

WARNING: Handling the cord on this product will expose you to lead, a chemical known to the state of California to cause birth defects or

other reproductive harm. Wash hands after handling.

For additional questions, comments or to explore other Lenmar battery solutions, visit our web site at: www.poweredbylenmar.com or call 800/424-2703 from 9AM – 5PM PST.

310-016-33-0218 r1

Charging your iPhone while installed in the iBatteryCase.

When charging an iPhone while installed in the iBatteryCase, switch the” ON / OFF” button located

on the bottom of the case to “ON” to allow the iPhone to charge. To charge just the iBatteryCase switch to “OFF” and the case will charge.

Lithium-Polymer battery must be recycled or dispose of properly.

Image 1
Contents Charging Your iBatteryCase Battery ConsumptionOn/Off Switch Installing your iPhone into the iBatteryCaseConsommation énergétique Installation du iPhone dans le bloc-pile intelligentVérification de la puissance restante du bloc-pile Charge du bloc-pile intelligentInstalación de su iPhone en el iBatteryCase Carga de su iBatteryCaseCarga de su iPhone mientras está conectado al iBatteryCase Consumo de la batería