Palm TreoTM manual Making a call

Making a call

Making a call

[ ! ] IMPORTANT Do not hold the multifunction button down too long when making, ending, or answering a call. This should be only a quick press, so you don’t accidentally activate your headset’s enhanced features, described later in this guide.

	1	Make sure the headset is turned on.
	2	Dial the number:
		Using the phone’s keypad Dial the number on the keypad, and then
		press the Send key.
		Using voice-activated dialing Press and release the multifunction
		button	, and then say the name of the person you wish to dial when
		you hear the tone.
		NOTE The Treo 650 does not support voice-activated dialing
		through Bluetooth wireless technology. For other phones check with
		the manufacturer. You must set the voice tags on your phone to use
		voice-activated dialing. For better reception, record the voice tags from
		the headset.
	3	Increase or decrease call volume by pressing the volume control
		buttons		. The tone volume increases or decreases to match the
		call volume.
	4	To end a call, press and release the multifunction button			, or press
		the button to end a call on your phone’s keypad.
8				Treo™ Wireless Headset