Fujitsu MB3891 manual Absolute Maximum Ratings, Recommended Operating Conditions

MB3891

■ABSOLUTE MAXIMUM RATINGS

Parameter	Symbol	Conditions		Rating		Unit
			Min.		Max.
Power supply voltage	VBAT		−0.3		7	V
	VCC-VSIM		−0.3		7	V
	IO	OUT1 pin			120	mA
	IO	OUT2 pin			50	mA
LDO regulator	IO	OUT3 pin			100	mA
	IO	OUT4 pin			100	mA
	IO	OUT5 pin			50	mA
VSIMOUT chargepump	IO	VSIMOUT pin			10	mA
Power dissipation	PD	Ta ≤ +25 °C			800*	mW
Storage temperature	Tstg		−55		+125	°C

* : The packages are mounted on the dual-sided epoxy board(10 cm ⋅ 10 cm)

WARNING: Semiconductor devices can be permanently damaged by application of stress (voltage, current, temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.

■RECOMMENDED OPERATING CONDITIONS

Parameter	Symbol	Conditions		Value		Unit
			Min.	Typ.	Max.
Power supply voltage	VBAT		3.0	3.6	5.5	V
	VCC-VSIM		3.0	3.6	5.5	V
LDO capacitor guarantee value	CO	OUT1 to OUT5, V-BACKUP pin	0.8	1.0		∝F
REF-OUT capacitor guarantee	CO	REF-OUT pin		0.027		∝F
value
VSIMOUT capacitor guarantee	CO	VSIMOUT pin		10		∝F
value
Operating ambient temperature	Ta		−20	+25	+85	°C

WARNING: The recommended operating conditions are required in order to ensure the normal operation of the semiconductor device. All of the device’s electrical characteristics are warranted when the device is operated within these ranges.

Always use semiconductor devices within their recommended operating condition ranges. Operation outside these ranges may adversely affect reliability and could result in device failure.

No warranty is made with respect to uses, operating conditions, or combinations not represented on the data sheet. Users considering application outside the listed conditions are advised to contact their FUJITSU representatives beforehand.

6