Calling
Tips when recording and using voice commands If your phone cannot detect your voice command, one of the following might have happened:
•You spoke too softly – try speaking louder.
•You held the phone too far away – hold it as you do during a call.
•The voice command was too short – it should be about one second long and more than one syllable.
•You spoke too late or too soon – speak immediately after the tone.
•You did not record the voice command when the handsfree was attached – attach the handsfree and then record.
•You used another intonation – use the same intonation as the recorded voice command.
•The environment could be too loud or have too much background noise.
Forwarding calls If you cannot answer incoming calls, you can forward them to another number, for example, your answering service.
When the Restrict calls function is activated, some Forward calls options are not available.
Select from the following forward options:
•Always Forward – forward all calls.
•When Busy – forward calls if you are already on the phone.
•Not Reachable – forward calls if your phone is turned off or if you are unreachable.
•No Reply – forward calls that you do not answer within a specified time limit (service provider- dependent).
To activate or deactivate a call forward
1} Settings } the Calls tab } Forward Calls.
2Select a call type and then one of the forward options Activate or Deactivate. If you have selected Activate, go to step 3.
3Enter the phone number to which you want your calls to be forwarded, or } Lookup to find
the contact in your phonebook } OK.
28
This is the Internet version of the user's guide. © Print only for private use.