
SmartChip and battery information
Always turn off the phone and detach the charger before you insert or remove a SmartChip.
To insert SmartChip and battery
1Remove the battery cover by sliding it as shown in the picture.
2Slide the SmartChip into its holder. Make sure that the gold contacts of the SmartChip are facing down, and the cut off corner is correctly aligned.
Getting started
3Place the battery on the back of the phone with the label side up and the connectors facing each other.
4Locate the notches along each side of the phone. Using the notches as a guide, slide the back cover upward until it clicks in place. % 8 Replacing
5
This is the Internet version of the user's guide. © Print only for private use.