Siemens XT55 manual COM port transmission settings

XT55 GPS Startup User’s Guide Confidential/Released

s

mobile

The appearing dialog box shows the default settings for the selected COM port.

NOTE: The pre-defined factory settings of the XT55 GPS port SDn1 (4800bps, 8 data bits, no parity, 1 stop bit, no flow control) cannot be changed, otherwise no connection to the XT55 GPS port will be established.

Figure 2: COM port transmission settings

If a connection to the XT55 module has been established, the transmitted protocols will be displayed.

Figure 3: Displaying the transmitted NMEA protocols

XT55_GPS_startup_ug_V02a Page 8 of 13 28.06.2004