Getting Started, Control Locator, Unpacking, Set Up

Getting Started

Control Locator

1.TENSION ARM

2.CENTER SPINDLE

3.TURNTABLE

4.SPEED SELECT SWITCH

5.TONE ARM

6.SIZE SELECT SWITCH

7.TONE ARM REST

8.TURNTABLE SWITCH

9.TONE CONTROL

10.ON/OFF VOLUME KNOB

11.AC ADAPTER

(placed in a white cardboard box, located at one side of poly-foam)

12.TURNTABLE SUSPENSION SCREW

				Unpacking
12	3	2	1	1 Remove packing materials from unit.
				1 Remove packing materials from unit.

Note: Save all packing materials.

2 Remove plastic bag covering unit.

53 Remove tie from A/C adapter.

4 Open lid and remove styrofoam shipping

7material from turntable.

	8	5	Remove black tie-wrap from under the tone
			arm.
4	12	6	Using your Fingers,Turn the Turntable
			Suspension Screw (12) clockwise until it is all

the way down. Do not force it. This allows turntable to float on its shock absorbers.

Getting Started

Set Up

1Plug A/C adapter into appropriate outlet.

A/C adapter

Note: This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other.) This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet try reversing the plug, if the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

10 9

7 Gently pull out the rubber shipping pads.

Power Source

Unwind the A/C power adapter (located in a white box inside the packaging foam). Connect the small end of the adapter to the back of the turntable. Connect the other end to an A/C power outlet.