Siemens TDMA 1900 manual User group, §Menu§ Setup During a call Select a function, Select group

31.5.02 06-S46 Body.fm		i 37 Eagle Am Engl, A31008-H4500-A1-4-7619
		Setup
				81
	User group	© Z	During a Call

§Menu§	Setup	User group
	select a function:

If offered by the service provider, this service enables groups to be formed. These have access, for example, to internal (company) information or special tariffs which apply to them. Check with your service provider for details.

User group

Activate or deactivate the function. “User group” must be deactivated for normal phone use.

§Menu§	Setup	During a call
	select a function:
Call waiting		Z

If you are registered for call waiting, you can confirm whether it is set. You can also activate or deactivate the function (p. 20).

Hide ID © Z

When you make a call, your number may be displayed on the recipient's phone (depending on the service provider).

Select group

You may select or add groups other than the preferred groups (see below). The service provider supplies you with code numbers for the groups.

Outgoing access

In addition to network control for a user group, it is possible to choose whether outgoing calls outside the group are permitted. If the function is deactivated, only calls within the group are permitted.

Preferred group

If activated, only calls within this standard user group can be made (depending on the network configuration).

To suppress this display, you may activate the “Hide ID” mode for the next call or for all subsequent calls. (You may need to register with your service provider for this function.)

Prefix code œ Z

Prefix codes are needed when dialing international numbers. For example all international calls placed from the US require the international access prefix "011". To place an international call in TDMA mode, you may still access the international dialing codes through +List , but you will be prompted to enter the international access prefix. These prefix codes must be preset (see p. 23 Placing International Calls).