Jensen JMC-1100 Hints for Best Reception, Stereo Phonograph Operation, CD Play / Pause Mode

Page 13

Set the FM mode selector at “ST” position for receiving stereo programs. The “ST” indicator will appear on LCD to show fm stereo program is receiving.

Hints for Best Reception:-

-AM: The receiver has a built-in AM bar antenna. If AM reception is weak, slight rotate or re-positioning of the unit will usually improve the AM reception.

-FM: The receiver has a build-in FM wire antenna hanging at the rear cabinet. This wire should be totally unraveled and extended from best reception.

STEREO PHONOGRAPH OPERATION

Note Before Use

-Remove the stylus protector.

-Be sure that the tone arm is being detached from the tone arm rest before operating, and re-secured again afterwards.

1.Raise the turntable dust cover.

2.Press the “PHONO” function button.

3.Set the 33/45/78 speed selector to the proper position depending on the record to be played.

4.Place the record on the platter (use the 45 RPM record adaptor when playing 45 RPM record).

5.Lift the tone arm from the rest and slowly move it to the record side. The platter will being to rotate.

6.Place the tone arm to the desired position of the record.

7.Adjust the volume to the desired level.

8.At the end of record, the platter will automatically stop rotating. Lift the tone arm from the record and return it to the rest.

9.To stop manually, lift the tone arm from the record and return it to the rest.

Remark: as some kind of record the auto-stop area was out of the unit setting, so it will stop before the last track finish. in this case, select the auto-stop switch to “OFF” position, then it will run to the end of the record but will not stop automatically (turn off the unit by power button or switch back the auto-stop switch to “ON” position to stop the platter rotate). Then put back the tone arm to the rest position.

PLAYING COMPACT DISC

LOADING THE DISCS

1.Press “CD” button.

2.Press “OPEN/CLOSE” button to open the CD door.

3.Place a CD with the printed side facing up inside the tray.

4.Press the “ ” or “ DISC-CH” button to turning the CD tray, and loading out the other disc compartment.

5.Press the “OPEN/CLOSE” button again to close the CD door.

6.CD search is performing; the display will show the total number of disc, number of tracks and playing time of disc.

Note: CD searching will be performed every time when switching to CD mode or closing the CD door. All CD functions will be responded only after the CD searching is completed.

CD PLAY / PAUSE MODE

1.Press the “PLAY/PAUSE” button to start playback, the first track of the first disc will be played and the play indicator will appear on the LCD display.

12

2.or press either the “ DISC 1”, “ DISC 2 ”, “ DISC 3 ” button, unit will play the disc inside the desire tray directly.

3.To interrupt, press the “ PLAY/PAUSE ” button once, and the display will start flashing. Press

Page 12 Page 14
Image 13
Page 12 Page 14
Contents JMC-1100 Once you have established a comfortable sound level To establish a safe levelWe Want You Listening For a Lifetime Customers RecordImportant Safety Instructions Page On Protection Against Laser Energy Exposure On PlacementOn Condensation Protect Your Furniture Precaution Fore USESpeaker Connection Getting StartConnecting the AC Power Cord Location of Controls and IndicatorsFront View & Back View Remote ControlBattery Installation Setting the Clock Battery PrecautionsOperating Instructions Listening to Radio Hints for Best Reception CD Play / Pause ModeStereo Phonograph Operation Playing Compact Disc Loading the DiscsSkip Mode Skip UP /SKIP Down Stop ModeSearch Mode Search UP /SEARCH Down Repeat PlayListing to Tape General Operation Stop / Eject KEY CD ProgrammingPlayback RecordingRecording from Tape Deck B to Deck a More Features Sleep Timer SettingDubbing AT High Speed Recording from RadioACTIVE/DE-ACTIVE Timer Function ON/OFF Timer Setting by Remote onlyPresets EQ Function Extra Bass FunctionAbout Cassette Tapes Care and MaintenanceCassette Care Head CleaningCompact Disc Care Cleaning the Unit Trouble Shooting GuideProblem Possible Cause Solution SpecificationPower Requirement ServicePower Consumption Frequency Range

JMC-1100 specifications

The Jensen JMC-1100 is a remarkable piece of audio equipment designed for professionals and enthusiasts who are serious about sound quality. This versatile machine boasts a plethora of features tailored to meet the demands of modern audio production.

At its core, the JMC-1100 is equipped with a high-resolution digital audio converter, ensuring that even the most nuanced sounds are captured with impeccable fidelity. This is essential for musicians, sound engineers, and content creators who rely on precise audio reproduction. With support for a wide range of sample rates and bit depths, the JMC-1100 can seamlessly integrate into various audio setups, from home studios to large-scale live productions.

One of the standout characteristics of the JMC-1100 is its robust connectivity options. It features multiple inputs and outputs, including XLR, TRS, and USB-C ports. This makes it incredibly versatile, allowing users to connect a variety of instruments, microphones, and audio interfaces with ease. The USB-C connection enhances compatibility with modern devices while providing efficient data transfer and power supply.

The Jensen JMC-1100 also employs advanced processing capabilities. Its onboard DSP (Digital Signal Processing) allows users to apply effects and make real-time adjustments to their sound. This can include EQ adjustments, compression, and reverb effects, empowering users to tailor their audio to their specific needs without requiring additional outboard gear. The intuitive interface ensures that navigating through various settings is straightforward, enabling quick adjustments during live performances or recording sessions.

In terms of build quality, the JMC-1100 makes a strong impression. Constructed from durable materials, it is designed to withstand the rigors of frequent use. The compact and portable design means that it can easily be transported, making it ideal for musicians who perform on the go or production teams that move between locations.

Overall, the Jensen JMC-1100 stands out as a premier choice for anyone seeking high-quality audio performance coupled with versatility and user-friendly technology. Whether used in a studio setting or on stage, its features and reliability connect seamlessly to deliver an exceptional audio experience.
Top Page Image Contents