Audio-Technica AT-LP2D-USB Turntable Setup Guide

Setup & Operation

Assembling the Turntable

The AT-LP2D-USB requires some assembly before first use. IMPORTANT: Do not connect the AC power cord until assembly is complete.

1.Carefully place the turntable platter on the center spindle, making certain the platter is fully seated on the spindle.

2.While holding both ends of the red tape ribbon on the turntable belt, carefully pull the belt over the motor pulley (Fig. 2a). (If the belt drops off, remove the turntable platter and put the belt back on it, as described on page 7.)

3.Once the belt is seated in the pulley's groove, carefully remove the ribbon. Make certain the belt is not twisted.

4.Place the turntable mat on top of the turntable platter (Fig. 2b).

5.If desired, the hinged dust cover may be removed. Hold both sides of the dust cover and pull upward gently and evenly to detach the cover from the turntable (Fig. 2c). Keep the cover in a safe, clean place.

6.To re-install the dust cover, guide the dust cover hinges into the two hinge receptacles located at the back of the turntable housing

Connecting to Computers with USB Input

The USB cable (included) connects your AT-LP2D-USB turntable to your computer without need for special drivers. Refer to included software guide (also available online at www.audio-technica.com) before connecting the turntable to your computer.

Setting the Pre-amp (Phono/Line) Switch

For increased flexibility of use, this turntable has an internal stereo phono pre-amplifier. The Pre-amp Selector (Phono/Line) Switch is located on the back of the turntable. If the stereo system you are using has a PHONO input, set the Pre-amp Selector Switch to the “PHONO” position. If your stereo system does not have a PHONO input, set the Pre-amp Selector Switch to the “LINE” position and connect the turntable's output cables to the AUX or other high-level input on your stereo system (described later) (Fig. 3).

NOTE: If you are using the USB cable to connect your turntable to a computer, the Pre-amp Selector Switch setting has no effect on USB operation.

Figure 2 Assembling the Turntable 2a Drive belt

Red ribbon

Motor spindle

Drive belt

2b Record mat

2c Dust cover removal

Figure 3

“AUX”PHONO

Input

Jacks

Stereo System

White

Red

Pre-amp

Selector

Switch

LINEPHONO

PHONO LINE

USB

AT-LP2D-USB specifications

The Audio-Technica AT-LP2D-USB is a versatile and reliable turntable designed for vinyl enthusiasts who appreciate both classic vinyl playback and modern digital convenience. As part of Audio-Technica’s renowned lineup of audio products, the AT-LP2D-USB brings together quality craftsmanship, innovative technology, and user-friendly features to enhance the listening experience.

At its core, the AT-LP2D-USB boasts a high-fidelity, belt-driven mechanism that minimizes vibration, ensuring optimum sound quality. This direct drive system provides a stable platform for playback, which is essential for maintaining the integrity of the audio signal. The turntable features a durable and solid plinth, effectively reducing unwanted resonance that can affect sound clarity.

One of the standout features of the AT-LP2D-USB is its USB output. This digital connectivity port allows users to easily convert their vinyl records into digital audio files, which can be stored on a computer or other devices. The inclusion of an Audacity software package simplifies the digitization process, making it accessible even for those new to recording and editing audio.

Another notable characteristic is the AT-VM95E Dual Moving Magnet cartridge that comes with the turntable. This cartridge is designed to deliver excellent tracking and playback accuracy, ensuring that the rich details of your vinyl records are preserved. The elliptical stylus offers superior tracing capability compared to traditional spherical stylus designs, providing more depth and a fuller sound.

The AT-LP2D-USB is also equipped with a built-in switchable phono preamp. This feature allows users to connect the turntable directly to standard audio systems that lack a dedicated phono input, broadening its compatibility with various audio setups. Furthermore, the turntable provides a selectable speed option between 33 1/3 and 45 RPM, accommodating a wide variety of vinyl formats.

Constructed with a heavy-duty base to minimize skip and vibration, the AT-LP2D-USB comes with adjustable feet that ensure proper leveling on any surface, contributing to the overall fidelity of the playback. This combination of features and technology makes the Audio-Technica AT-LP2D-USB an appealing choice for both traditional vinyl collectors and modern music lovers seeking to seamlessly blend analog and digital formats.