Interaction between control key and display keys

The display is protected by a plastic film.

Remove the plastic film.

Status LED (light-emitting diode)			Display (display field)
lights up during a call;
flashes at:			Charging status
– Incoming call			= empty
– New messages			= empty
– New messages			Ufull
– Alarm call, appoint-			flashes: Battery low
ments, anniversaries			Current functions
			Current functions
Reception strength			and display keys
Control key	Ñ	e	With the display keys, you
Talk key	Ñ	e	have access to the current
	Annabella		have access to the current
	Annabella		functions.
– Accept call	19.07.01	13:13	functions.
– Accept call	{	¨
– Dial number	{	¨
– Dial number			End call and On/
– Switch from hands-			End call and On/
– Switch from hands-			Off key
free talking to			Off key
free talking to			– End call
handset			– End call
handset			– Cancelling function
Open the directory			– Cancelling function
Open the directory			– One menu level back
Key 1			– One menu level back
Key 1			(press briefly)
Hold down to select Answ.			– Return to idle state
machine/Mailbox			– Return to idle state
machine/Mailbox			(hold down)
			(hold down)
Asterisk key			– Handset on/off
Asterisk key			(hold key down)
Hold down to acti-			(hold key down)
Hold down to acti-
vate and deactivate			Caller list
the ringer			Access to message lists
Keypad protection			Sel Services key
On/off			Sel Services key
On/off	Microphone		– Open network access
hold key down!	Microphone		– Open network access
Handsfree key	Socket		list: press briefly!
Handsfree key	– for Headset,		– R key function:
	– for Headset,		– R key function:
	MP3-Player		hold key down!

INT

With the display keys you can carry out functions that can also be partly controlled with the control key.

The side of the control key which you must press is indi- cated in the operating instruc- tions by arrows:

F/ G (left/right) E/ D (top/bottom)