Uniden 880 Scan Channels in Memory, Listen to Channels in Memory, Clear Channels from Memory

Scan Channels in Memory

1.From All Channel Scan mode (see page 10), press MEM/SCAN until MEM SCAN displays; the radio scans memory channels only.

2.Press MEM/SCAN again to return to MEMORY mode or the last channel scanned.

Listen to Channels in Memory

1.Press MEM/SCAN until MEM displays.

2.Turn the Channel Selector knob and only saved channels will be heard.

Clear Channels from Memory

1.In MEM mode, select a channel.

2.Press and hold MEM/SCAN until CLEAR displays.

3.Release MEM/SCAN. The radio plays the next channel in memory.

MENUS

Access menus by pressing MENU/OK. The first menu, COLOR, displays. Turn the Channel Selector knob to cycle through the other menus:

ƒƒ COLOR - Backlight color ƒƒ CONT - LCD Contrast ƒƒ BRIGHT - Brightness

ƒƒ WXSCAN - Weather Scan mode ƒƒ DIAG - Diagnostics

––Battery Check

––Antenna Mismatch Check

––RF Power Check

ƒƒ Exit

Select Backlight Color

1.Press MENU/OK to activate the menus. Turn Channel Selector until COLOR displays.

2.Press MENU/OK. Turn Channel Selector until DAY displays.

3.Press MENU/OK. DAY blinks.

4.Turn Channel Selector to cycle through the available backlight colors or OFF. The selection number for that color displays in that

12