Uniden XS 910 quick start Troubleshooting

Page 11

TROUBLESHOOTING

TROUBLESHOOTING

The status light won’t

• Make sure the AC adaptor is plugged into the base and wall outlet

illuminatewhen the handset

• Make sure the handset is properly seated in the base.

is placed on the base.

• Make sure the charging contacts on the handset and base are clean.

 

 

The audio sounds weak

• Move the handset and/or base to a different location away from

and/ or scratchy.

metal objects or appliances and try again.

 

• Press channel while on a call to change the operating channel.

 

• Make sure that you are not too far away from the base.

 

 

Can’t makeor receive calls.

• Checkboth ends of the telephone line cordare plugged in firmly.

 

• Make surethe AC adaptor is plugged into the baseand wall outlet.

 

• Disconnect the AC adaptor for a few minutes, then reconnect it.

 

• Make sure that you are not too far from the base.

 

• Charge the handset.

 

 

The handset doesn't ring or

• The battery pack may be weak. Charge the battery for 20-25hours.

receive a page.

• The handset may be too far away from the baseunit.

 

• Place the baseunit away from appliances or metal objects.

 

 

If you still have a problem.

Australia: www.uniden.com.au New Zealand: www.uniden.co.nz

 

 

Page 7

Image 11
Contents Guide Computers Installation & SafetyStart Included in Your Package ContentsMounting the Base Unit on a Wall Getting StartedControls and Functions Cleaning the charging contacts Battery MaintenanceBattery use time per charge When the Battery charge becomes lowMaking and Receiving Calls Using Your PhoneAdjusting the Ringer Tone and Earpiece Volume Your PhoneChain Dialing Memory dialing from Talk ModeStoring Phone Numbers Making Calls with Memor Y DialingErasing a Rocketdial RocketdialStoring the Rocketdial Making Calls with RocketdialTroubleshooting TroubleshootingOne Year Limited Warranty For Purchasing a Uniden Product Warranty