PREPARATION
CONNECTING A MOTOROLA MICRO TAC SERIES BATTERY
The conditioner/charger is designed to charge a Motorola Micro Tac series battery that you can mount directly onto the conditioner/charger.
Motorola Micro
Tac Battery
1.Hold the battery with its charging contacts to the right, then place the battery’s bottom slide groove over the conditioner/charger’s slide guides.
2.Push the battery toward the left until it clicks into place.
CONNECTING A
MOTOROLA 9800 SERIES OR NOKIA 101/ 232 BATTERY
To charge a Motorola 9800 series, Nokia 101, or Nokia 232 battery, you need to mount the proper supplied charging adapter along with the bat- tery.
Note: The adapters are labelled on the bottom.
Label on bottom
of adapter
Follow these steps to charge a Motor- ola 9800 series battery using the ap- propriate charging adapter.
1.Place the charging adapter’s bot- tom slide groove to the right of the charger/conditioner’s slide guides.
Note: The adapter’s notches (on the bottom) and the conditioner/ charger’s tabs must be aligned.
Alignment notches
and tabs
2.Push the adapter toward the left until it clicks into place.
3.Hold the battery with its charging contacts to the right, then place the battery’s bottom slide groove over the adapter’s slide guides.
4