Toshiba AT7-C user manual Turning on the power, Wall outlet, USB charge

Always place your tablet or AC adaptor on a flat and hard surface that is resistant to heat damage.

1.Plug the USB connector of the Micro-USB cable into the AC adaptor.

Figure 3-3 Connecting the AC adaptor 1

2-pin

3-pin

2.Plug the other smaller connector of the Micro-USB cable into the Micro-USB port on your tablet.

The Micro-USB connector of the Micro-USB cable must be correctly plugged into the Micro-USB port on the tablet. Failure to do so correctly may result in possible damage to the Micro-USB port.

Figure 3-4 Connecting the AC adaptor 2

2

1

3.Plug the AC adaptor into a live wall outlet.

Wall outlet

The fastest way to charge your tablet is with the included AC adaptor plugged into a wall outlet.

USB charge

In “suspend or shutdown mode,” you can also charge your tablet, although more slowly, by connecting the Micro-USB cable to the USB port on your PC. Please make sure your PC is turned ON while charging via USB. If your PC is turned OFF, depending on PC specifications, the tablet battery may discharge. We recommend that you do not use your tablet while charging via USB as auto shutdown may occur if the battery charge is too low.

Turning on the power

This section describes how to power up your tablet.

User's Manual 3-7