Safety instructions
1.Read these instructions.
2.Keep these instructions.
3.Heed all warnings.
4.Follow all instructions.
5.Do not use this apparatus near water.
6.Clean only with a dry cloth.
7.Do not block any of the ventilation openings. Install in accordance with the manufacturer’s instructions.
8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9.Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with a cart, stand, tripod, bracket or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
15.Where a mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
16.Please keep the unit in a good ventilation environment.
17.Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on apparatus.
Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Caution: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing, and no objects filled with liquids, such as vases, shall be placed on the apparatus.
The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the use to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
The exclamation point within the equilateral triangle is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying this appliance.
Caution: To prevent electric shock, do not use this polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
Introduction
Thank you for purchasing the AT-LP240-USB Direct-Drive Turntable (USB and Analog). This extremely accurate high-quality turntable is designed primarily for music lovers to play records with their audio systems. As an added benefit, the turntable offers a USB output that allows direct connection to your computer for easy LP-to-digital conversion. The turntable also features a built-in switchable phono/line pre-amp that allows connection to a stereo system equipped with either a phono or line-level input.
The AT-LP240-USB Direct-Drive Professional USB and Analog Turntable System features the following:
•USB output—no special drivers required for direct connection to your computer
•Direct drive high-torque 16-pole motor
•Selectable 33/45/78 RPM speeds
•Selectable internal stereo phono pre-amplifier
•S-shaped tone arm assembly with:
•Adjustable counterweight
•Anti-skate adjustment
•Tone arm height adjustment and lock
•Tone arm lift with hydraulic action and lift lever
•Tone arm rest with locking mechanism
•Dedicated ground lug for tone arm grounding
•Stroboscopic platter and speed accuracy indicator
•Damped cast aluminum record platter with slip mat
•Start/stop button
•Removable stylus target light
•45-RPM adapter
•Adjustable feet for leveling
•Removable dust cover
To assure maximum satisfaction from this product, please read the information and follow the instructions presented in this manual. Please keep the manual in an accessible location for future reference.
Unpacking
Carefully unpack the turntable and verify that the following parts are included and intact:
•Slip mat (above the dust cover)
•Dust cover (above the turntable)
•Platter (under the turntable)
•45 RPM adapter (accessory section)
•Counterweight (accessory section)
•Headshell (accessory section)
•Power cord (accessory section)
•USB cable
•Dual RCA (female) to 1/8" (3.5 mm) mini-plug (male) stereo adapter cable
•Dual RCA (female) to 1/8" (3.5 mm) mini-plug (female) stereo adapter cable
•Dual RCA (male) cable with integrated ground wire
•Stylus target light
•Audacity software (CD)
IT IS RECOMMENDED THAT ALL PACKAGING MATERIALS BE SAVED FOR POSSIBLE FUTURE STORAGE, MOVING OR SHIPPING.