RCA A380, RS255KM, RS2507, RS253TK, RS252KM, RS2506, RS2503, RS2505, RS2502, RS2501, A280, A185, A385 Tuner

TUNER

POWER

					FM STEREO
					ALARM/CLOCK
DISPLAY/DEMO					SURROUND
					BASS BOOST
PHONES
SHUF	FLE	INTRO			KEVLAR
			REPEAT	ATS	S O U N D S Y S T E M
					HELP MODE

1.Press TUNER to select the radio.

2.Press TUNER again to select the next radio band. Choices are:

AM/FM/FM Stereo (RS models) FM/MW/LW, RDS (ALTIMA models)

The tuner can be either TUNE or PRESET mode. When in PRESET mode, the PROG light is on.

Tip: Your audio system has several preset stations.

Tuning to a Station

DECREASE to tune in the desired station.	GB
Using Presets

1.Press PRESET/TUNE to

select PRESET mode.	FMPR:01
2. Press DECREASE or

INCREASE, or rotate the jog to access the

previous or next preset station. The display first shows the frequency, and after a few seconds, the program number. (FMPR:01 is FM reset 1)

Auto Preset Programming

Press and hold TUNER button for 2 second to scan sta- tions in the selected band. The stations will then stored as preset channels. Maximum 32 stations can be stored. Beware of your preset channels being erased accidentally because the scanning and storing

1.Press PRESET/TUNE to select TUNE mode.

2.Either rotate the jog or press INCREASE or

Factory Presets

FM(MHz)

87.50 90.10 98.10 106.10 107.9

87.50 MHz

AM (kHz)

520

600

1000

1400

1710

process is automatic upon pressing TUNER button. You can stop the automatic scan by pressing TUNER button, but the erased stations cannot be recovered.

MW(kHz)	LW(kHz)
522	150
603	170
999	200
1404	270
1611	283

Setting Presets

1.Press PRESET/TUNE to access TUNE mode.

2.Press INCREASE or DECREASE, or rotate the jog to access the desired frequency.

3.Press the SET button once.

4.The most recently accessed program location will be displayed together with a blinking program icon

(AMPR, FMPR, or LWPR.)

5.If a different program location is preferred, press INCREASE or DECREASE to move to the desired preset number (0-32).

6.Press SET to store the selected frequency at that preset.

Tip: Press and INCREASE or DECREASE for more than 1second to automatically tune up/down the band

for the next station.

To scan (ascending) to the next station, stop and play for 5 seconds and then continue scanning, press SEEK/SCAN for more than 2 seconds. Scanning contin- ues until you press another button.

Seeking/Scanning for a Station

To seek the next station (ascending), press

SEEK/SCAN.

Suppressing Stereo Signal

Press FM STEREO to toggle between FM mono and stereo for stereo FM stations.

10