Settings [Menu-4 ]
GPRS setting | Reset settings |
GPRS(General Packet Radio Service) is a technology that allows mobile phones to be used for sending and receiving data over the mobile network. GPRS is a data bearer that enables wireless access to data network such as the Internet.
Before you can use GPRS technology
You can reset your phone to its default configuration. To do so, proceed, as follows.
1.Select the Reset settings menu option.
2.You are requested to enter the
Note
-You need to subscribe to the GPRS service. For availability and subscription to GPRS service, contact your network operator or service provider.
-You need to save the GPRS settings for the applications used over GPRS.
Power on [Menu-4-6-1]
If you select Power on and you are in a network that supports GPRS, the phone registers to the GPRS network and sending short messages will be done via GPRS. Also, starting an active packet data connection, for example, to send and receive
When needed [Menu-4-6-2]
If you select When needed, the phone will use a GPRS connection only if you start an application or action that needs it. The GPRS connection is closed after it is no longer required by any application.
•The security code is preset to 0000. To change this, refer to page 52.
B2050 User Guide 53