Playing a Tape
Operating Instructions
To Play a Tape
1. Turn on the TV and tune it to channel 3, 4, or TVÕs video input to see the picture from the VCR.
2. Insert a tape in the VCR.
VCR automatically turns on. The
POWER
EJECT
Safety Tab
3. Press PLAY, if necessary. PLAY appears in the VCRÕs display panel.
4. Press TRACKING up or down to remove any streaks from the picture, if necessary. Details are on page 17.
5. Press STOP.
6. Press REW. REW will appear in the VCRÕs display panel.
The VCR will automatically rewind the tape if it reaches the end of the tape during playback. While rewinding, you can press POWER and the VCR will turn off after rewinding.
7. Press EJECT on the VCR to eject the tape once it is completely rewound.
PLAY
STOP | REW | FWD |
PAUSE
RECORD
14