•Tone setup: to set the ringing tone type for incoming call or others.
•Volume: to set the volume level for the ringing and keypad tones.
•Alert type: to define how the phone notifies you when
receiving an incoming call. The options are: Ring, Vibrate, Ring & Vib., Ring after Vib., Silent and Beep once.
–When alert type is set to Vibrate or Silent, no ringing tone will be heard and 
or 
is displayed when the phone is in the Idle mode.
•Answer mode: to set send key or any key or auto (headset mode only) to answer an incoming voice call on or off.
•Extra tone: to set the Warning, Error, Camp on, Connect On or Off. For example, when set to on, the phone sounds a warning tone when the battery is running out of power.
•Light: user can define handset light options.
Tips for Call Options
•A call can be connected to any single caller by pressing Option key. When user press Option key during active call, user can choose one of those functions from the list:
–Hold: hold a call on.
–Retrieve: reconnect a holding call.
–Retrieve all: reconnect all holding call.
–Swap: switch between the call on hold and active.
–Conference: make a
–Transfer: transfer a call.
–Spilt: to suspend the
–End single: end one of conference call.
–End all: end a
–End: End a call.
–Mute/Unmute: mute the call during the conversation.
–New call: make a new call during an active call.
–Contacts: shortcut to contacts menu.
–Text message: shortcut to Message menu.
GETTING STARTED
21