Control Elements, Application, Connection

TRUTH B2030P/B2031P

1.1 Before you get started

1.1.1 Shipment

The B2030P/B2031P were carefully packed at the factory to assure secure transport. Should the condition of the cardboard box suggest that damage may have taken place, please inspect the unit immediately and look for physical indications of damage.

+Damaged units should NEVER be sent directly to us. Please inform the dealer from whom you acquired the unit immediately as well as the transportation company from which you took delivery of the unit. Otherwise, all claims for replacement/repair may be rendered invalid.

1.1.2 Initial operation

The TRUTHs must be placed on a flat and stable surface.

1.1.3 Warranty

Please take a few minutes and send us the completely filled out warranty card within 14 days of the date of purchase. You may also register online at www.behringer.com. The serial number needed for the registration is located on the rear of the unit. Failure to register your product may void future warranty claims.

2. CONTROL ELEMENTS

The control elements described in the following are the same on both speakers.

Fig. 2.1: Rear panel connectors

This is the terminal clamp for the minus cord of your speaker cable.

This is the terminal clamp for the plus cord of your speaker cable.

The connection terminal of your TRUTH is recessed. This way, you can place it in the vicinity of walls.

+Always power down your amp before connecting it to the TRUTH.

SERIAL NUBMER. Please take a few minutes and send to us a completely filled out warranty card within 14 days of the original date of purchase. Otherwise, warranty claims may be rendered invalid. Or fill out the warranty information online at www.behringer.com.

3.APPLICATION

3.1Connection

Fig. 3.1: Connecting an amplifier

Please follow these steps to connect your TRUTHs to a power amp: Loosen the plus screw (red ring with a “+”) and the minus screw (black ring with a “-”). Now insert the plus cord of the speaker cable connecting the amp to your TRUTH into the plus opening. Then, connect the minus cable into the minus opening. Tighten the screws. Do the same to connect the other TRUTH.

+Make sure that all connections are done properly. Speaker cables are color-coded to help avoid confusion. You’ll know that the signal is inverted (i.e. you’ve mixed up the connections) when you notice that bass frequencies are getting lost and when the stereo characteristic of the signal is majorly worse.

+Always make sure that bare wire ends never touch the open end of another speaker cable, speaker connectors or metal parts of your amp.

3. APPLICATION

B2031P specifications

The Behringer B2031P is a prominent studio monitor that has carved a niche for itself among audio professionals and enthusiasts alike. Known for its impressive sound quality and versatile applications, the B2031P is particularly favored in home studios, project setups, and even larger audio production environments.

One of its standout features is the 8-inch woofer, designed to deliver deep bass responses while ensuring clarity in mid-range frequencies. Complementing the woofer is a precision tweeter that extends the high-frequency response up to 20 kHz, which is paramount for the accurate reproduction of intricate audio details. This combination makes the B2031P capable of conveying a wide frequency range effectively, an essential criterion for any monitoring system.

The B2031P incorporates advanced technologies to enhance its performance. One notable technology is the "Propellerhead" design, which minimizes distortion and contributes to a clear and open sound. The rear-firing bass port aids in delivering extended low frequencies, ensuring that audio professionals can hear everything from thumping kicks to the subtlest nuances in orchestral scores. This thoughtful design helps users make informed mixing and mastering decisions.

Moreover, the monitor features a bi-amped design, utilizing separate amplifiers for the woofer and tweeter. This means that each driver receives dedicated power, which can drastically reduce distortion and increase headroom. The B2031P is powered by an impressive 150 watts of total power, enabling it to perform robustly even at higher volumes.

Listeners will also appreciate the acoustic design of the B2031P, which includes a molded enclosure to reduce resonance and provide an accurate soundstage. This construction technique helps in delivering consistent sound, allowing users to mix and reference tracks with confidence.

Connectivity is another area where the B2031P shines, as it offers both XLR and TRS inputs, making it compatible with a wide array of audio interfaces and equipment. Its versatility extends to its ability to handle a range of signal levels, making it suitable for both professional and entry-level setups.

In conclusion, the Behringer B2031P is a formidable choice for anyone seeking reliable studio monitors. With features such as a bi-amped design, impressive driver combination, and flexible connectivity options, it provides a thorough and honest listening experience essential for accurate audio production. Its balance of performance and affordability makes it a noteworthy contender in the realm of studio monitors.