Specifications

System	4-Track, 2-Channel Stereo
Heads	One Hard Permalloy Record/Playback Head
	One Hard Permalloy Playback Head
	One Ferrite Erasing Head
Motors	Two DC Servo Motors
Wow and Flutter	0.09% (WRMS, JIS)
Fast Winding Time	Less than 120 seconds (C-60 tape)
Frequency Response (at -20 dB recording level):
Type IV (Metal) Tape	20 to 16,500 Hz
Type II (Chrome) Tape	20 to 16,000 Hz
Type I (Normal) Tape	20 to 16,000 Hz
Signal-to-Noise Ratio (Dolby NR Off)	More than 45 dB
Noise Reduction Effect:
Dolby B NR ON	More than 10 dB (at 5 kHz)
Dolby C NR ON	More than 19 dB (at 5 kHz)
Harmonic Distortion	No more than 0.8% (at -4 dB: 160 nwb/m)
Input (Sensitivity) LINE (INPUT)	100 mV (Input Impedance 68 kOhm)
Output (Reference level) LINE (OUTPUT)	0.5 V (Output Impedance 1.9 kOhm)
Power Requirements	AC 120V, 60 Hz
Power Consumption	17 Watts
Dimensions	415/16 ✕ 169/16 ✕ 913/16 Inches (HWD)
....................................................................................................................................................	(125 ✕ 420 ✕ 250 mm)
Weight	9 lbs 1 oz (4.1 kg)

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.