RCA VR336 manual Using Two VCRs for Copying and Editing Tapes

Page 23

Recording a Program

Using Two VCRs for Copying and Editing Tapes

Operating Instructions (Refer to “Connecting Two VCRs for Copying” hookups.)

Use one VCR as the playback VCR and the other as the recording VCR.

Caution: The unauthorized recording of television programs and other materials may infringe the rights of others.

1.Turn on the TV and VCRs.

2.Tune TV to the VCR viewing channel, either 3, 4, or TV’s video input.

3.If you have connected your VCR using Option A (page 6), tune recording VCR to channel 3 or 4 — the one selected on the back of the playback VCR. If you have connected your VCR using Option B (page 6), press INPUT on recording VCR to select the line input.

4.Insert the tape you want to copy into playback VCR. Insert a blank tape with safety tab in place into recording VCR.

5.Press PLAY, then PAUSE on playback VCR when you reach the point on the tape or program where you want to begin copying. If the tape was not recorded on the playback VCR, streaks may appear and you may need to adjust tracking. To prevent on-screen displays on the playback VCR from appearing on the recording, use PAUSE button to start and stop playback.

6.Press RECORD, then PAUSE, on recording VCR.

7.Press PAUSE buttons on both VCRs at the same time to begin copying the tape.*

8.Edit out segments that you do not want to copy by pressing PAUSE on recording VCR to stop copying the tape. Then locate the next segment you want to copy on the playback VCR by using FWD, REW, and PLAY. Press PAUSE on the playback VCR. Press PAUSE at the same time on both VCRs to resume copying.

9.Press STOP on both VCRs when you are finished.

*You may turn off the TV after the recording has started as it does not have to be on to copy a tape.

Copying and Editing Using Compatible Remote

If you have a compatible RCA, ProScan, or GE remote with VCR1 and VCR2 buttons, you can program this VCR to respond to VCR1 (VCR2). This allows you to control both VCRs with one remote for easier copying and editing.

Set the Remote Control feature of this VCR to the VCR1 or VCR2 position. The remote then controls the VCR with either the VCR1 or VCR2 button — whichever position you select in the menu.

1. Press MENU to display the VCR MAIN MENU.

2. Press 4 to display PREFERENCES.

3.Press 1 to activate the Remote Control feature.

4. Press VCR1 or VCR2 on your compatible remote to change the setting and program this VCR to respond to the VCR1 or VCR2 button — whichever you select.

Important Reminder: Remember you must press VCR1 or VCR2 on the remote — whichever you selected in the menu — before the remote will operate this VCR.

VCR MAIN MENU

1 Timer Recordings

2 Set Clock

3 Channels

4 Preferences

PREFERENCES

1 Remote Control: VCR1

PREFERENCES

( PRESS VCR2 TO CHANGE )

2 Auto Play: ON

3 Auto TV/VCR: ON

0 Exit

21

Page 22 Page 24
Image 23
Page 22 Page 24
Contents USER’S Guide Product Registration Important InformationTable of Contents Choose one answer from below Optional Hookups How to hook up two VCRs for copying tapesChoosing a Hookup What type of Cable-TV system* do you have?Back of VCR Antenna or Cable System Without a Cable BoxBasic hookup Advanced hookupCable Box Plug in power cords of VCR, TV, and cable boxCable System With Cable Box to Unscramble All Channels Cable System With Cable Box to Unscramble Pay Channels Only Recording Connecting Two VCRs for Copying TapesOption a Hookup Option B HookupTurn on the VCR Check accessories with VCRStartup Insert batteries in remote Turn on the TVPlace channels in the VCR’s memory Select the languageSkip this step if you used one of the basic hookups Set the Auto TV/VCR featureAdd or remove channels from the VCR’s memory Set the time and dateSkip this step if you used one of the advanced hookups Use Tvvcr buttonSpeed Tape Speed ButtonsChannel Up or Down To play a tape Using the Playback FeaturesAuto Play Feature PlaybackManual Tracking Pause for Stop ActionPicture Search Automatic Tracking00000 Display ButtonTime Counter To Index Search Commercial Scan Search ButtonIndex Search Go-To SearchTo Make a Recording RecordingsNormal Recording Recording SpeedsDisplay on TV Screen Express RecordingStopping a Recording in Progress Setting a Timer Recording Recording While You’re Away Timer RecordingPress 2 for Only Some channels Select Cable Box Viewing ChannelIf you have a cable box, follow the directions below Press 2 for Review Existing Progs. feature Recording FeaturesChecking or Clearing Timer Recordings Timer Recording From the VCR’s Line InputCopying and Editing Using Compatible Remote Using Two VCRs for Copying and Editing TapesRemote Sensor Location of ControlsFront Panel Display Panel Back PanelTrouble Heres what to try Trouble ChecksWill not auto channel search active VCR makes noise when stoppedCassette with safety tab removed does not start to Rewind does not operateCleaning the VCR SpecificationsLimited Warranty Index Programs Overlap Message Remote Control VCR1/VCR2 FeatureSignal Type CABLE/ANTENNA Feature Part Number 96-VR336-1 10330 N. Meridian Street Indianapolis,

VR336 specifications

The RCA VR336 is a versatile and user-friendly virtual reality headset designed to enhance the immersive gaming and multimedia experience. With its sleek design and advanced features, the VR336 caters to both casual users and serious gamers seeking high-quality virtual reality experiences.

One of the standout features of the RCA VR336 is its impressive display technology. The headset boasts a high-resolution display that provides clear and vibrant visuals, making virtual worlds come to life. This enhanced visual quality allows users to engage fully with their environments, whether they are exploring new gaming realms, watching films, or participating in virtual meetings.

Another significant characteristic of the VR336 is its ergonomic design. The headset is lightweight, ensuring comfort during extended gaming sessions. Additionally, the adjustable straps and padding allow users to achieve a secure fit, minimizing fatigue and discomfort. This focus on user comfort reflects RCA's commitment to providing an enjoyable and immersive experience.

The RCA VR336 also integrates cutting-edge motion tracking technology. This allows for accurate detection of head movements, enabling seamless interaction within virtual environments. The headset's built-in sensors track gestures and movements, ensuring that users can navigate and explore their virtual surroundings intuitively.

Furthermore, the VR336 supports a wide range of compatibility options. It can easily connect to various devices, including PCs and consoles, allowing users to access a myriad of games and applications. The device also supports both wired and wireless connections, providing flexibility in how users choose to engage with their content.

The RCA VR336 also includes integrated audio features, with built-in speakers that deliver immersive sound. This audio experience enhances the overall realism of virtual environments, making users feel like they are truly part of the action. Additionally, the headset is designed to be compatible with external audio devices, enabling users to customize their audio experience further.

With user-friendly setup and intuitive controls, the RCA VR336 makes it easy for anyone to dive into the world of virtual reality. Whether for gaming, education, or social interactions, the RCA VR336 stands out as a feature-rich and accessible option for anyone looking to experience immersive virtual reality.
Top Page Image Contents