Call from SpeedTalkSM Contact List (Barge)
1.From Standby mode, press and hold ST key to access your ST Contact List.
2.Use 
to highlight the ST Contact entry you wish to call.
3.Press and hold the ST key.
●Sender hears ST talk tone and can begin speaking.
●Receiver has the options to answer or ignore
using 
.
4.Press and hold ST Key to send alert.
5.Release ST Key after speaking.
●Receiver hears incoming barge tone.
●Receiver hears sender’s voice followed by the floor available tone.
●Sender’s device displays connected screen.
6.Press and hold ST key to speak.
7.Release ST key to listen.
Call from SpeedTalkSM Contact List (Alert)
1.From Standby mode press and hold the ST key to access your ST Contact List.
2.Use 
to highlight the ST Contact entry you wish to alert.
3.Press Left Soft Key 
Alert.
●Receiver hears alerting tone and receives alert message.
4.If receiver accepts the alert and places a ST call to the sender,
●Sender hears incoming barge tone.
●Sender hears receiver’s voice followed by the floor available tone.
●Receiver’s device displays connected screen.
5.Press and hold ST key to speak.
6.Release ST key to listen.
S p e e d T a l k S M
53