Installation
Installing the Player in the Car
1.Rest the player in the center of the rear seat.
2.Insert the center seat’s safety belt through the player’s retainer holes as shown.
IMPORTANT NOTE: Secure the player with as little slack in the seatbelt as possible for safety. Tighten the seat belt snugly so the player does not move out from the back of the seat.
When the player is not in use the LCD screen should be closed firmly. Do not place objects in the front storage compartment other than the AC cord or the supplied car cigarette lighter cord.
3.Fasten the safety belt strap by inserting and passing it through the video player’s two end slot openings as shown.
4.Plug the cigarette lighter adapter into the DC POWER (CAR) jack on the back panel of the player. Attach the other end of the power cord to the car’s cigarette lighter.
Note: Make sure the car’s ignition is on before plugging the player’s adapter into the cigarette lighter socket.
5.Adjust the LCD monitor angle for desired viewing.
6.If desired, connect headphones to either of the two headphone jacks on the back of the player.
Chapter 1 | 7 |