LG-TD7130
requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.20W/kg and when worn on the body, as described in this user guide, is 0.566 W/kg. (Body- worn measurements differ among phone models, depending upon available accessories and FCC require- ments). While there may be differences between SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID BEJRD7130.
Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) website at http://www.wow- com.com.
*In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incor- porates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.
108
APPENDIX
Quick Connect Instructions
Windows 2000 Users
1.Select Phone and Modem options from the Control Panel.
2.Choose the Modem tab and click Add.
3.Check the Don't detect modemis selected option and click Next.
4.Choose Standard 19200bps Modem.
5.Select your available COM port(e.g. selected ports COM1), click Next and Finish.
6.Under Phone & Modem options, select the newly installed Standard 19200bps Modem and click Properties.
7.Ensure Maximum Port Speed is set to 115200. This will match the default setting of the handset. Click OK to finish.
Windows XP Users
1.Install the modem by entering the Control Panel.
2.Click Switch to Classic View and execute Phone and Modem Options.
3.Enter Modem tab. Click Add.
4.Click the Don't detect my modemoption and click Next.
5.Choose Standard 19200bps Modem.
6.Click selected ports and click COM1 Port and Click Next.
109