13
8. Sending SMS
You can send SMS messages using the devices installed with
Note: the SMS service is not available for the devices intended for Internet connection through the Internet 4G service.
Select the device which you want to use for sending SMS in the menu and connect the particular device to the computer (cable, bluetooth or infrared port or insert the PCMCIA card).
This is the window for sending SMS which is viewed after clicking the button with the picture of message:
It is possible to send SMS via the particular device only in case it is not connected via GPRS.
You can write the message of up to 160 characters in the text field. Right to that you can input the phone number of the recipient or you can use the list of contacts read from
Left to the text field is the indicator of signal level and its value in decibels (dB) and on the opposite side of the window you can find the indicator of battery level. These elements are available in several seconds after opening this window (communication between computer and the device takes several seconds for getting this data). Send button is disabled if it is not possible to send the message or the message is being currently sent. If you press the button it gets disabled. In the time it is enabled again the message was successfully sent.
For closing this part of the window for sending the SMS press the button with picture of message again. Please note that actions related to this button are relevant for the device currently selected in the menu.