Polycom KH 458 manual Interface Implementation, Set the Switch Interface Type

Page 13

2

Interface Implementation

This section describes the recommended programming to use the

Wireless Telephone System with an Inter-Tel Eclipse PBX with an

Associate Display Phone. The procedures assume:

•The Eclipse system is installed and operational in an approved configuration. See the Telephone Switch Interface Matrix document for tested configurations.

•A trained Inter-Tel technician or system administrator will be on site with the SpectraLink installer to program the system.

•The SpectraLink 6000 System or SpectraLink 8000 Telephony Gateway is installed and the handsets are available for programming.

The Inter-Tel Eclipse digital interface to the SpectraLink 6000

System is licensed for use in the U.S. and Canada only

Set the Switch Interface Type

SpectraLink 6100 MCU

The Link 150 Master Control Unit requires the switch interface type to be configured using the front panel buttons. The configuration procedures are detailed in the SpectraLink 6100 MCU: Installation and Operation document.

SpectraLink 6300 MCU

When configuring the SpectraLink 6300 MCU, the PBX interfaces are available as sub-menu selections when defining the Interface Module type using the SpectraLink 6300 MCU Operator’s Console. Refer to SpectraLink 6300 MCU: Operator’s Console for details on configuring the Interface Modules.

PN: 1725-36136-001_E.doc

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents LinkPlus Interface Guide Patent Information Trademark InformationCopyright Notice Contact InformationSpectraLink 6000 System SpectraLink 6300 MCU About this GuideSpectraLink 6000 System SpectraLink 6100 MCU SpectraLink 8000 Telephony GatewayCustomer Support Related DocumentsThis manual uses the following icons and conventions Icons and ConventionsPage Plan Programming Plan the InterfaceExtension assignment Outgoing line accessSystem forwarding Toll restrictionsHandset indicators Wireless Telephone DisplayAssign Extension Numbers Function Menu Programming Feature Programming RequirementsLine sequences Function sequencesSpectraLink 8000 Telephony Gateways SpectraLink 6100 MCUHold MuteRing types Interface Implementation Set the Switch Interface TypeAssociate Display Phone Key Mapping Station features for handset Copy settings from a wired setProgram Eclipse PBX and handsets Copy Programming Shelf Interface Module Extension Assignments Worksheet
Top Page Image Contents