Polycom 8020, 8030 manual Charger Models

Page 34

Accessories

The Battery Pack can be changed while the call is still in progress. Do not press END. Quickly remove the discharged Battery Pack and replace with a charged Battery Pack, press END to turn the handset back on and then press START to resume the call.

Notes on Battery Packs

Battery Pack life will vary depending on handset model and fea- tures and system infrastructure.

Maximum Battery Pack performance is achieved after a few charge/discharge cycles.

If multiple Battery Packs are supplied with your handset, Polycom recommends that each be fully charged upon receipt to prolong battery life. Battery Packs will slowly lose charge if unused. To maintain battery potential, charge unused Battery Packs occasion- ally or alternate Battery Pack use.

After a length of time Battery Packs will lose the ability to maintain a charge and to perform at maximum capacity and will need to be replaced. This is normal for all batteries.

If your Battery Pack requires replacement, contact your system administrator.

Charger Models

Three charger models are available for the SpectraLink 8020/8030 Wireless Telephone. The Single Charger will charge a single handset with an installed Battery Pack. The Dual Charger will charge the hand- set and a spare Battery Pack. The Quad Charger can charge up to four Battery Packs at a time. Any SpectraLink 8020/8030 Battery Pack can be charged in any charger.

The Single and Dual Chargers allow the handset to remain operative in speakerphone mode or with a headset while charging. Handsets may be charged while in standby mode, while in an active call or while turned off.

34

Image 34
Contents Spectralink 8020/8030 Wireless Telephone User Guide SpectraLink 8020 Wireless Telephone SpectraLink 8030 Wireless Telephone FCNPatent Information Trademark InformationModel Numbers Introduction About This GuideTable of Contents Handset Administration Menu Navigation HandsetModes of Operation Your handset has five modes of operationStandby Mode Display Handset DisplaysStatus Bar Indicators Telephone ring icon. a regular telephone call is coming PTT ring icon. a PTT call is comingSoftkey Labels Location Service Rtls is enabledThese are some of the softkeys you will see Delete CancelHave been entered CursorSave Saves the current entry to Phonebook RedialDialed SetGetting Started Battery Pack towards you. The Battery Pack releases outwardBasic Handset Operation Summary Lock the keypad Softkey ExtensionLine number of the second call Line number on the display may bePress the END key to silence the ring Mute the Press the Mute softkey. microphone Change the profileIf you want to Then Facility-Specific Features Advanced FeaturesConfig Menu Toggle Options Changing Ring Settings Silent Vibrate Soft LoudConfig Menu Options From previous Alphanumeric entries Data Entry and EditingKey Predial Predial may be disabled in the Config MenuSpeakerphone RedialDelete an entry Press the Del softkey to delete an entry PhonebookPress NavOK Dial number Press Start or the Spkr softkeyNavOK Speed-DialReturn to Press the Back softkey or NavOK. phonebook list Name Push-to-talk PTT Press the END key to exit the PTT call End a PTT call Change PTT volumeTurn off PTT Standby Time AccessoriesBattery Packs StandardCharger Models LED Solid On PackLED Off Single Charger Dual Charger Quad Charger Headsets Carrying OptionsHandset Administration FAQsHow do I charge the Battery Pack? How should I clean the handset? Specifications AdministrtatorAdministration Care of handset 47 FAQs IndexRing 18 Keep the headset jack covered when it is not in use Care of Your HandsetContact Information
Related manuals
Manual 101 pages 23.09 Kb