Pantech Z530i manual Exposure to Radio, Frequency Signals

USER GUIDELINES	WHEN YOU COME ACROSS
	ANY OF THESE PROBLEMS
Any Troubles?	Try it out.

Please check if battery discharges completely. 1. No display appears Try this; Turn off phone, take out battery pack

and put it back in. Then, turn it on again.

Please wait if you just now turned it on. If you

2. No Signal Strength still have low signal strength, please move to other place.

3.Abnormal function Please disconnect battery pack, connect it

& no power supply	again, and then turn it on.
4. Shorter talk time	The charge and discharge of battery shortens
	its lifetime since it is expendable. Please don’t
	store it in extremely high or lowtemperature,
	which will result in short lifetime.
	The operating time of battery varies since
	power consumption influenced by area,
	signal and so on.
5. Voice echoes	Please control volume and move to other
	place.
6. Heat occurs while	A lot of current is in use during a call. Long-
in use.	time call or use of game and Internet can
	generate heat.

EXPOSURE TO RADIO	USER GUIDELINES
FREQUENCY SIGNALS

Our wireless portable hand-held phone is a low power radio transmitter and receiver. When the phone is on, it receives and also sends out radio frequency (RF) signals.

The ministry of information and communication adopted RF exposure guidelines with safety levels for handhold wireless phones. The design of your phone complies with the safety guidelines.

Should you need any other information regarding Exposure to RF signal, please log onto the Curitel homepage(www.curitel.com)

100 101