Pantech C3b manual Options during a call, To put a call on hold, and return to a held call

Options during a call

To switch your phone’s microphone back on

Press the [Unmute] Soft key, or press [Options] then select [Unmute].

To put a call on hold, and return to a held call

You can put a call on hold whenever you want.

You can make another call while you have a call in progress if your network service provider supports this service. One call is active, while the other is on hold. You can also switch between the calls.

To put a call on hold

Press the [Options] Soft key then select [Hold], or press the [s] key. The callers name and icon are grayed while the call is on hold.

To return to a held call

Press the [Options] Soft key then select [Resume], or press the [s] key again.

To make a call while you are on a call

❶Enter the phone number that you want to dial or look it

up in Address Book entry.

❷Press the [s] key to dial the second call. The first call is automatically put on hold.

To switch between two calls

Press the [Swap] Soft key. The current call is put on hold and the held call is reactivated so that you can continue your conversation with the caller.

To end a call

Press the [s] key in the normal way. To terminate all active calls at the same time while you are in multi-party call, select [Options] and then select [End All Calls].

Transferring a call

You can transfer or connect the current call to the held call if your network service provider supports this service, so that callers can talk to each other. You will be disconnected from both of them.

❶During a call, make or answer a call in the normal way then press the [Options] Soft key.

❷Press the [u/d] key to highlight the [Transfer] option then press the [Select] Soft key or [o] key.

The two callers will be connected to each other.

28