Pantech PN-218 manual Answering Calls, Speaker Phone, HARD/TIMED Pause Feature, Answering a Call

BASIC FUNCTIONS

ANSWERINGCALLS

1When your phone rings or vibrates, press to answer the incoming call.

C(Depending on your phone’s settings, you may

Halso answer incoming calls by opening the flip

2or by pressing any digit key.)

To ignore incoming calls, press [IGNORE].

2To end a call, press .

SPEAKERPHONE

The speaker phone feature lets you hear through the speaker and talk without holding the phone.

1To turn the speaker phone on/off while in idle,

answering or calling modes, press and hold .

2The phone returns to normal (Speaker Phone Off) after ending a call or when the phone is turned off and back on.

BASIC FUNCTIONS

HARD/TIMEDPAUSEFEATURE

Pauses are used for automated systems (e.g., voice mail, calling cards). Insert a pause after a phone number then enter another group of numbers. The second set of numbers is dialed automatically after the pause. This feature is useful for dialing into systems that require a code.

C

H

1	To insert a hard/timed pause, enter a phone		2
	number then press	[MENU]. Select either a

Hard Pause (“P”) or a Timed Pause (“T”).

•Hard Pause : Inserting a “Hard Pause” means that the caller has to press the “Send” key before the dialing continues.

•Timed Pause : Inserting a “Timed Pause” suspends the dialing for 2 seconds before the dialing continues.

2Press to dial or to save.

(Refer to page 30 for more details about storing a phone number.)

ANSWERINGACALL

1To answer a call, press any key except , ,

, , or .

•See page 74 for more information on setting answering call options.

2To end the call, press .

22 23