Recording a Program
Recording While You’re Away (Timer Recording)
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the AUDIO1 and VIDEO1 IN jacks of the VCR. Recording from the line input is convenient if you have a satellite receiver or similar component attached to these jacks.
To timer record from the component connected to the VCRÕs line input, press INPUT or “0,0”on the remote to enter VIDEO in the channel number position.
PROGRAM 1 | (ONE TIME) |
CHANNEL | VIDEO |
START TIME | |
END TIME | |
START DATE | |
TAPE SPEED | SLP |
PRESS CLEAR TO CORRECT PRESS MENU TO EXIT
Checking or Clearing Timer Recordings
1.Press MENU on the remote to display the VCR MAIN MENU.
2.Press 1 to display the TIMER RECORDINGS menu.
3.Press 2 to display the programÕs menu.
4.Press MENU for next program or CLEAR to erase the program.
VCR MAIN MENU
1 TIMER RECORDINGS
TIMER RECORDINGS
1 CREATE A NEW PROGRAM
2 REVIEW EXISTING PROGS.
PROGRAM 1 | (ONE TIME) |
CHANNEL | 08 |
START TIME | 02:10 PM |
END TIME | 03:35 PM |
START DATE | 08/04/96 SUN |
TAPE SPEED | SLP |
PRESS CLEAR TO ERASE PRESS MENU FOR NEXT PROG
26