THE CD PLAYER
THE
CD
PLAYER
EN Resume (for RCA only)
When you stop CD play or power off the unit (without disconnecting power sup- ply), Resume is automatically activated. It stores all the current settings and modes: current track, time display, Mode
Program
This function lets you listen to the tracks you selected in the order you want. The CD player must be in Stop mode.
To cancel your program, press and hold the MODE key in the stop mode. ERASE will appear on the display. The program will be automatically canceled.
To exit program mode, press STOP then PROG.
THE DISPLAY | EN | |||
|
| 2 | 4 | 6 |
1 |
| 1 |
| |
| esp | 5 P 7 | ||
| 3 |
| ||
|
| BASS BOOST | 8 | |
|
|
| ||
(Repeat/Repeat All/ Program/ Random/ Random All), and ESPX. When play mode is on again, the unit resumes to the set- tings and plays from where it stopped. If CD compartment lid is opened, RESUME stores only the following modes: Shuffle Mode (Repeat/ Repeat All), EQ setting (Bass boost/ Surround) and ESPX. Other settings such as track play, time display, program setting and memory are all reset or cancelled.
Repeating
You can replay the entire CD or one |
| |
track as many times as you want; |
| |
Press MODE repeatedly to |
| |
1. | Replay the entire disc; |
|
2. | Replay the current track; | 1 |
3. Play the beginning of each track for 10 |
1.Press PROG. P will show on the display.
2.Select the track to be stored by pressing FWD or REV & press PROG again to confirm.
3.Repeat step 2 to store other tracks.
4.Press play button to listen to your pro- gramming.
Note : The unit switches off automatically after 15s if no key has been activated to prevent excessive battery consumption. During programming, the unit can switch off if you do not press any key within 10s. If the unit switches off, the programme will be stored in memory. Resume pro- gramming by turning the unit on again.
You can program up to 24 tracks.
To play your program again, press PLAY. To add/edit tracks to the program, go to
Random Play
1. Press SHUFFLE until shows on display.
2.Press PLAY to listen.
3.For
PAUSE
Press PLAY to suspend playback The minutes and secondes flash when interrupted
STOP
Press STOP to stop playback.
The player switches off automatically after 5 seconds or press twice STOP key to turn off your CD player.
REMAIN TIME
1.Repeat entire disc
2.Repeat current track
3.Random tracks play
4.ESPX
(When the buffer is being loaded, the brackets around the ESP symbol will increase)
5.Program mode
6.Shows when the control button is on HOLD position.
seconds. |
(The number of the track being played will |
be displayed and SCAN will appear.) |
4. Press again to the function |
stop mode ; press and hold PROG button again. Refer to step 2 of the above.
To check the program, press PLAY and FWD.
.
Press PROG during playback to read the | 7. Shows when batteries are low |
remaining playback time. |
|
| 8. Bass Boost ON |
5 | 6 |