Herramientas Requeridas Para EL, Ensamblado

MODEL 2510

MODEL 2535

MODELO 2510

OPERATION (Figures 5 and 6)

This Fan may be operated by the Manual Controls located on top of the unit (as shown in Figure 5) or by the Remote Control (shown in Figure 6).

1. Place the Fan on a firm and level surface.

CAUTION: Plastic or rubber tabs, like the feet on this unit, may stick to furniture surfaces and/or hardwood floors.The unit may leave a residue that could darken, stain or leave permanent blemishes on the finish of certain furniture surfaces, including wood surfaces, and/or hardwood floors.

2. Plug the cord set into a 120 volt outlet.

Be sure that the plug fits tightly into outlet.

When plugs fit loosely into receptacles, they may slip partially or completely out of the re- ceptacle with only the slight movement of the attached cord. Receptacles in this condition may overheat and pose a serious fire hazard; if covered by a curtain or drape, the fire hazard is even greater.

3.Turn the Fan ON by pressing the Power Button ().

4.SPEEDS: Press the Fan Speed Button () to desired speed setting. Each time the Fan Speed Button is pressed, the speed will change from High (3), to Medium (2), to Low

(1). When the Fan is turned OFF and ON again, the unit will resume the speed at which it was turned OFF.

5.OSCILLATION: Press the Oscillation Button () to start and stop the oscillation function.

6.TIMER: The timer function allows the unit to be set to operate for a length of time from 1 hour to 7 hours, in increments of 1 hour. Press the Timer Button () to set the length of time desired. Each time the timer button is pressed, the time is increased by 1 hour. After reaching 7 hours, pressing the timer button once more will reset the Fan to continuous running. The lights on the front of the unit will light up appropriately with the length of time that the Fan is set for.

7.To turn the Fan OFF, press the Power Button () and unplug the unit from the electrical outlet.

HERRAMIENTAS REQUERIDAS PARA EL

ENSAMBLADO (no incluidas)

- Destornillador de cabezal Phillips #2

ENSAMBLADO

1.Cuidadosamente retire el ventilador de la bolsa plástica y de la caja. Para facilidad de ensamblado, coloque el ventilador en forma horizontal para que la parrilla frontal esté apuntando hacia abajo.

2.Arme las Bases de Apoyo interconectando las Salientes en la Base de Apoyo A dentro de los Orificios de Salientes en la Base de Apoyo B. Introduzca el Cable Eléctrico a través del orificio grande en el centro de la Montura de la Base de Apoyo. (Figura 1)

3.Asegure los (4) Tornillos #8 de X 9,9 mm en los cuatro orificios de la parte inferior de la base. (Figura 2)

4.Alinee las Lengüetas de Alineación de la Montura de la Base de Apoyo con las ranuras de alineación en la parte inferior del ventilador, teniendo cuidado de que el canal del cable en la parte inferior de la base de apoyo debe estar apuntando hacia la parte posterior del ventilador. (Figura 3)

5.Asegure la Montura de la Base de Apoyo a la parte inferior del ventilador con (4)Tornillos M5 de 12,7 mm de Largo.Suavemente elimine cualquier sobrante del Cable Eléctrico y colóquelo en el Orificio de Colocación del Cable. (Figura 4)

Ranura de

Alineación

Lengüeta de

Alineación de la

Montura de la Base

de Apoyo

Canal del Cable

Montura de la Base de Apoyo	Figura 3

Timer Button	Speed Button
Oscillation	Power
Button	Button

Base de

Apoyo B

Base de

Apoyo A

Montura de la Unidad de base a Parte Inferior

	Montura de la
Salientes	Base de Apoyo
Salientes
Figura 1

Montura de la Base de Apoyo - Vista Inferior

Montura de la

Base de Apoyo

		Orificio de
Figure 5	Tornillos	Colocación del
Figure 5	Tornillos	Cable
	M5 X 12,7 mm	Cable Eléctrico
		Cable Eléctrico
		Figura 4
Tornillos
#8 X 9,9 mm	Figura 2

Rev. B 9/07

2510ES

Rev. B 9/07

2510ES

2510 specifications

The Lasko 2510 is a versatile and efficient tower fan designed to enhance indoor comfort while promoting energy savings. This elegant fan combines modern aesthetics with smart functionality, making it a great addition to any room.

One of the standout features of the Lasko 2510 is its powerful yet quiet operation. Equipped with a proprietary fan technology, it delivers a strong airflow while minimizing noise, allowing users to enjoy a soothing breeze without the disruptive sounds typical of many traditional fans. This is especially beneficial for nighttime use in bedrooms, where silence is often valued.

The fan is designed with three distinct speed settings, allowing users to customize their cooling experience based on their preferences and the current environment. Whether it's a mild breeze during the day or a more robust flow in the heat of summer, the Lasko 2510 can easily adapt to meet your needs.

A key characteristic of the Lasko 2510 is its space-saving design. Standing at just over 30 inches tall with a slim profile, it can fit neatly into corners or small spaces, maximizing your room's available space. This makes it an ideal choice for apartments or rooms with limited square footage.

The fan also features oscillation functionality, which enables it to distribute air more evenly across the room. By moving back and forth, it helps eliminate hot spots and create a more comfortable atmosphere. This is particularly useful in large rooms, where stagnant air can be a problem.

Safety is paramount in the design of the Lasko 2510. It comes with a built-in safety fuse that shuts off the fan in case of overheating, along with a sturdy base that minimizes the risk of tipping over. This makes it suitable for households with children and pets.

Additionally, users will appreciate the convenience of an easy-to-operate control panel located at the top of the fan. This allows for quick adjustments without having to bend or reach. Some models also come with a remote control, providing added convenience for users to adjust settings from across the room.

In summary, the Lasko 2510 stands out in the crowded market of tower fans, offering a blend of efficiency, design, and versatility. With its powerful airflow, quiet operation, compact profile, and safety features, it is a practical solution for anyone looking to improve their indoor comfort while keeping energy consumption in check. Whether for daily use or seasonal cooling, the Lasko 2510 is an excellent investment in personal comfort.