3.In the Setup window, click the Local tab. In the Serial Port field, select the port where you connected the cable. Click OK.
4.Connect the phone to the cable or place it in the sync cradle.
Note: Do not remove the phone from the cable during synchronization. Do not turn the phone on or off during synchronization.
5.Tap the sync button on the phone screen. During your first synchronization, a message asks for your user name.
6.On the computer, enter a user name. Click OK.
Note: Every Palm device must have a unique name. Problems may occur if you synchronize more than one device with the same name. You may synchronize your new phone to an existing user name from a previous
this section.
78 | Synchronizing Your phone With a Computer |