Kyocera M6000 manual Battery Safety Guidelines, Never use any damaged battery

The LED indicator and the battery icon in the upper-right corner of the screen indicate the battery status:

LED Indicator	Battery	Battery status
	icon
Solid RED		Battery is charging.
Flashing RED		Battery is low.
Solid GREEN		Battery is fully
		charged.

You must have at least a partial charge in the battery to make or receive calls. You can safely recharge the battery at any time, even if it has a partial charge.

Note: Before removing the battery, make sure the phone is powered off.

Warning:

•Do not remove the battery while it is charging.

•Always remove the Wall/USB Charger from the wall outlet first before removing the USB cable from the device.

Battery Safety Guidelines

•Do not disassemble or open the battery.

•Do not crush, bend, deform, puncture, or shred the battery.

•Do not attempt to insert foreign objects into the battery.

•Do not immerse the battery or expose it to water or other liquids. Even if a battery appears to dry out and operate normally, internal parts can slowly corrode and pose a safety hazard.

•Always keep the battery between 15 °C and 25 °C (59 °F and 77 °F). Do not expose the battery to extremes of temperature (heat or cold), fire, or other hazards such as a cooking surface, iron, or radiator.

•Never use any damaged battery.

•Only use the battery for its intended phone.

•Only use the battery with a qualified charger. Use of an unqualified battery charger may present a risk of fire, explosion, leakage, or other hazard. If you are unsure about whether a charger is qualified, contact customer support.

•Do not short-circuit the battery or allow metallic conductive objects—such as keys, coins, or jewelry—to contact the battery’s terminals.

•Replace the battery only with another qualified battery. Use of an unqualified battery may present a risk of fire, explosion, leakage, or other hazard. If you

User Guide 11