Kyocera E3100 manual Get Started, Phone Battery, Install Battery, Charge Battery

1 Get Started

Phone Battery

Install Battery

1.Hold the phone face down.

2.Find the notch on the bottom of the phone. It is a rectangle. Using your thumbnail, remove the battery cover by prying it up from the bottom.

3.Place the battery in the battery casing. Make sure that the metal contacts of the battery and battery casing touch.

4.Replace the battery cover by sliding the notches into the openings on the top of the battery casing.

5.Snap the cover into place.

Charge Battery

1. The Micro-USB jack is located on top of the phone. Connect the AC adapter to the Micro-USB jack.

2.Plug the adapter into a wall outlet.

The battery icon in the upper-right corner of the screen tells you whether the phone is:

–Charging (the icon is animated)

–Partially charged

–Fully charged

You must have at least a partial charge in the battery to make or receive calls. You can safely recharge the battery at any time, even if it has a partial charge.

Note: Before removing the battery, make sure the phone is powered off.

User Guide 9