Kyocera 32300 Security, Enable Roaming Call Alert, Lock Phone, Set Limit Calls, Change Lock Code

Enable Roaming Call Alert

You can set the phone to warn you before you answer or place a call while roaming.

Note: Call prompt is disabled when the phone is in Emergency Mode.

From Roam Call Alert, select Enabled.

The phone emits a distinctive ring to indicate when you are roaming during a call. To accept or place a call while roaming, you must press 1.

Security

This section describes the security features on your phone. You can adjust these features to prevent access to your personal information. All security features are shielded by a four-digit lock code (typically 0000 or the last 4 digits of your phone number).

Lock Phone

Set Lock Phone

With your phone locked, you can call only emergency numbers or your service provider’s customer service number. You can still receive incoming calls.

1.From Security, enter your four-digit lock code.

2.Select Lock Phone > OK and one of the following:

–Lock Now locks the phone immediately.

–On Power Up locks the phone every time you turn it on.

Unlock the Phone

1.From the home screen, select Unlock.

2.Enter your four-digit lock code.

Set Limit Calls

You can limit the calls that can be made from your phone to emergency numbers, your contacts, and your service provider’s numbers.

1.From Security, enter your four-digit lock code.

2.Select Limit Calls and one of the following:

–No Limit does not limit calls.

–Limit Outgoing limits outgoing calls while incoming calls still work.

–Limit All limits both incoming and outgoing calls.

Change Lock Code

Change your lock code from the default.

1.From Security, enter your four-digit lock code.

2.Select New Lock Code > Yes.

3.Enter a new four-digit code.

4.Re-enter your new lock code.

76 Security